Page 1 of 2

LibreELEC 7.0

PostPosted: Tue Apr 26, 2016 10:51 pm
by vpeter
If anyone is still using TBS Matrix for this purpose here is the image.
With very, very limited support. If it works great, if not ....
Two known bugs:
1) it doesn't work with some TV's (no signal)
2) powering down sometimes doesn0t work

LibreELEC-imx6.arm-7.0.0-matrix.tar
https://drive.google.com/folderview?id= ... aring#list

==================================================================================

As you may know some developers forked openelec project and created LibreELEC. We just hit our first release: https://libreelec.tv/2016/04/libreelec- ... 0-release/

There is also some imx6 support and I'm wondering if I should make also image for TBS Matrix system?
I remember there were some boot issues which would be nice to fix. Can someone describe them with reference to old threads?

Re: LibreELEC 7.0

PostPosted: Wed Apr 27, 2016 12:16 am
by ddjpp
Hi Peter!!
will not work if we do the update ;
remember to had problem with the led and fan speed.

Re: LibreELEC 7.0

PostPosted: Wed Apr 27, 2016 12:18 am
by vpeter
ddjpp Wrote:will not work if we do the update ;
remember to had problem with the led and fan speed.
Should work with update. But I always do fresh install (it is easier).
What led/fan issue? Can you find me a thread.

Re: LibreELEC 7.0

PostPosted: Wed Apr 27, 2016 12:23 am
by ddjpp

Re: LibreELEC 7.0

PostPosted: Fri May 06, 2016 1:07 am
by buddyrm
Tried the update with the new system and kernel from LibreELEC 7.0 imx6 release. It does not boot. Just incase someone wants to try this.

Re: LibreELEC 7.0

PostPosted: Fri May 06, 2016 1:34 am
by vpeter
buddyrm Wrote:Tried the update with the new system and kernel from LibreELEC 7.0 imx6 release. It does not boot. Just incase someone wants to try this.

Did someone wrote there is working image for matrix? No. SO this is the result ;)

Re: LibreELEC 7.0

PostPosted: Fri May 06, 2016 1:59 am
by buddyrm
Sorry then, misunderstood. :-(

Re: LibreELEC 7.0

PostPosted: Sat May 14, 2016 10:42 pm
by vpeter
Firs post updated. Read carefully!

Re: LibreELEC 7.0

PostPosted: Wed May 18, 2016 9:51 pm
by buddyrm
vpeter Wrote:Firs post updated. Read carefully!



Great, will install and get back to you on the results.

Re: LibreELEC 7.0

PostPosted: Thu Jun 02, 2016 10:56 pm
by buddyrm
So I installed it and it seems to work except I can not setup the wireless network. When I try to click on Librelec to setup network settings. It says the plugin is not ready yet and try again later. So I am stuck now. How do I setup the wireless network.?