TBSDTV Community Forum

Settings the video output resolution from XBMC is blocked somehow. It seems to be fixed at [email protected]

I would like to use [email protected] or [email protected] How can I get this done?

Kind regards,

Michel

You may try this from the console. (taken from [email protected] forum)

check supportet resolutions..

Code: Select all

cat /sys/class/graphics/fb0/modes

and dynamically change it with, e.g.

Code: Select all

echo 1 > /sys/class/graphics/fb0/blank
echo U:1280x720p-60 > /sys/class/graphics/fb0/mode
echo 0 > /sys/class/graphics/fb0/blank

Have you actually tried this?

No, as I didn't need this, but others yes. Isn't it working?

mijanek wrote:You may try this from the console. (taken from [email protected] forum)

check supportet resolutions..

Code: Select all

cat /sys/class/graphics/fb0/modes

and dynamically change it with, e.g.

Code: Select all

echo 1 > /sys/class/graphics/fb0/blank
echo U:1280x720p-60 > /sys/class/graphics/fb0/mode
echo 0 > /sys/class/graphics/fb0/blank

Hi mijanek!

With matrixTV 1.0.0.3-1 version:

Code: Select all

[[email protected] ~]# cat /sys/class/graphics/fb0/modes
S:640x480p-60
S:1920x1080p-30
S:1920x1080p-25
S:1920x1080p-24
S:720x576p-50
S:720x480p-60
S:720x480p-60
S:1280x720p-50
S:1280x720p-60
S:1920x1080p-50
S:1920x1080p-60
V:640x480p-60
D:1920x1080p-60
V:640x480p-60


echo S:1280x720p-60 > /sys/class/graphics/fb0/mode is working.

Looked everywhere, read all documentation, but no root password or other shell login credentials to be found

maybe documentation could be updated... No one guesses the root password to be root

What is the exact syntax to set it to [email protected]?

Tried several options, but get nothing but errors...

Sat4all wrote:What is the exact syntax to set it to [email protected]?

Tried several options, but get nothing but errors...

Should be:

Code: Select all

echo S:1280x720p-50 > /sys/class/graphics/fb0/mode

Thanks, [email protected] works. Picture is not very nice, but at least I am having some picture.