Page 1 of 1

More than 1 dvb/s/t/c in Matrix

PostPosted: Fri Aug 15, 2014 7:53 pm
by dubaisatshop
Any idea about connecting more than 1 dvb-s/s2, dvb-t or dvb-c USB device to Matrix at the same time ?

Re: More than 1 dvb/s/t/c in Matrix

PostPosted: Sat Aug 16, 2014 2:07 am
by piotrasd
hub USB ?

Re: More than 1 dvb/s/t/c in Matrix

PostPosted: Sat Aug 16, 2014 8:02 am
by updatelee
I use a USB 3.0 hub on a USB 3.0 port on my computer to run 4 DVB adapters off one port, works fine. Now the Matrix is USB 2.0 but still should have enough bandwidth to run 4, I just never tried it. Give it a go and report back.

UDL

Re: More than 1 dvb/s/t/c in Matrix

PostPosted: Sat Aug 16, 2014 4:31 pm
by diabloss
i used on all 3 usb ports 2 suntek's tuners (cable + sat) and 1 TBS tuner ... all 3 were working fine , a bit of heat but were working fine.

Re: More than 1 dvb/s/t/c in Matrix

PostPosted: Mon Aug 18, 2014 6:11 pm
by dubaisatshop
diabloss Wrote:i used on all 3 usb ports 2 suntek's tuners (cable + sat) and 1 TBS tuner ... all 3 were working fine , a bit of heat but were working fine.

Is it mean can stream from 3 attached USB devices to different clients simultaneously?

Re: More than 1 dvb/s/t/c in Matrix

PostPosted: Mon Aug 18, 2014 7:05 pm
by diabloss
Yes