Moderator Control Panel ]

OpenELEC 6.0.0 install question

OpenELEC 6.0.0 install question

Postby sparkey1000 » Tue Jan 26, 2016 7:48 am

I have a TBS2910 V23 and would like to install OpenELEC 6.0.0 containing KODI. In order to install a program a MfgTool2 file is required in conjuction with the program. All programs in the download section of the Matrix website have this file available. Since OpenElec 6.0.0 is not available on the website I am stuck. Does anyone know a way to obtain a copy of OpenELEC 6.0.0 that has an associated MfgTool2 file.

Regards

Sparkey1000
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby maspeter » Tue Jan 26, 2016 7:49 pm

Hello Sparkey1000
See Announcements and the first topic OpenELEC 6.0.0
maspeter
 
Posts: 17
Joined: Mon Jan 18, 2016 6:26 am

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Mon Feb 01, 2016 12:43 pm

Thanks maspeter for you response.

I went to https://drive.google.com/folderview?id= ... aring#list and downloaded OpenELEC-imx6.arm-6.0.0-matrix.tar.
This zip file has an MfgTool2 file which I ran. The file seems to download something into my Matrix TBS2910 v2.3. However, when I throw the program switch back to boot from update the unit just sits there. Nothing , just a blank screen. Any ideas anyone? Getting this unit to run Kodi is proving very difficult.
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby vpeter » Mon Feb 01, 2016 3:58 pm

This image was tested on v1.2 and v2.3.
Also check (or post here) content of log file mfgtool.log.

If you have serial console connect it and see what you get. If not you are on your own.
You could also connect to some other tv.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Fri Feb 05, 2016 8:14 am

Vpeter

Thanks again for your assistance.

I tried a monitor instead of a TV. Same problem. Blank screen.
I tried downloading and extracting the program and again installing the program. Same problem. Blank screen.

When I install the Matrix TV for Matrix V2.1 hardware from the Matrix website the unit works. The only thing wrong is that the openelec version is not the latest kodi version.

Here is the contents of the mfgtool.log
DLL version: 2.2.3
Thursday, February 04, 2016 18:01:34 Start new logging
ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running
ModuleID[2] LevelID[1]: new MxHidDeviceClass
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:5
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A11428
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A13FC8
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A1B368
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:6, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A21308
ModuleID[2] LevelID[1]: *** Error: 1, Drive: C:

See next post for continuance of file as I hit a character limit.

I get the feeling my problem is something simple. I am learning Linux and still have a long way to go.
Best Regards
Sparkey1000
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Fri Feb 05, 2016 8:15 am

DLL version: 2.2.3
Thursday, February 04, 2016 18:01:34 Start new logging
ModuleID[2] LevelID[10]: CMyExceptionHandler thread is running
ModuleID[2] LevelID[1]: new MxHidDeviceClass
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:5
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A11428
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A13FC8
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A1B368
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:6, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A21308
ModuleID[2] LevelID[1]: *** Error: 1, Drive: C:

ModuleID[2] LevelID[10]: Device Manager thread is running
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 0
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 0
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#btiahiddevice#9&2ea6e683&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 1
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_051d&pid_0002#8&346a859f&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 2
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_0566&pid_3055&mi_00#8&36e5d91d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 3
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_0566&pid_3055&mi_01&col01#8&130e9b5b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 4
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_0566&pid_3055&mi_01&col02#8&130e9b5b&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 5
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_058f&pid_6364&mi_01#8&1ef7dcd4&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 6
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_093a&pid_2510#7&2e338f4d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--index: 7
ModuleID[2] LevelID[1]: DeviceClass::FindDeviceByUsbPath() - DeviceListType_New--devPath: \\?\hid#vid_15a2&pid_0054#7&23abfbb0&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
ModuleID[2] LevelID[10]: new MxHidDevice[02A2AFF8]
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, devInstPathToFind: USB\VID_15A2&PID_0054\6&28D53DA8&0&1, _deviceInstanceID: USB\VID_15A2&PID_0054\6&28D53DA8&0&1
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_New, Find the device, Port: 1
ModuleID[2] LevelID[10]: DeviceClass::AddUsbDevice() successful USB#VID_15A2&PID_0054#6&28D53DA8&0&1#{A5DCBF10-6530-11D2-901F-00C04FB951ED} add to current list, retrycount: 0
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_0054, Hub:4-Port:1
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT, Notify
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Arrive
ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceArriveEvent.
ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device arrive1
ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 0
ModuleID[2] LevelID[10]: ExecuteCommand--Boot[WndIndex:0], File is D:\Linux Programs for TBS2910\OpenELEC-imx6.arm-6.0.0-matrix.tar Download 2\OpenELEC-imx6.arm-6.0.0-matrix\MfgTool2-TBS-Matrix\Profiles\MX6Q Linux Update\OS Firmware\mfgtool2\u-boot-mx6q-sabresd.bin
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is D:\Linux Programs for TBS2910\OpenELEC-imx6.arm-6.0.0-matrix.tar Download 2\OpenELEC-imx6.arm-6.0.0-matrix\MfgTool2-TBS-Matrix\Profiles\MX6Q Linux Update\OS Firmware\mfgtool2\uImage, address is 0x10800000
ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Load[WndIndex:0], File is D:\Linux Programs for TBS2910\OpenELEC-imx6.arm-6.0.0-matrix.tar Download 2\OpenELEC-imx6.arm-6.0.0-matrix\MfgTool2-TBS-Matrix\Profiles\MX6Q Linux Update\OS Firmware\mfgtool2\initramfs.cpio.gz.uboot, address is 0x10C00000
ModuleID[2] LevelID[10]: PortMgrDlg(0)--Command Load excute successfully, retry count: 0
ModuleID[2] LevelID[10]: ExecuteCommand--Jump[WndIndex:0]
ModuleID[2] LevelID[10]: *********MxHidDevice[02A2AFF8] Jump to Ramkernel successfully!**********
ModuleID[2] LevelID[10]: CmdOperation[0], current state command has been finished and the last command is successful, so SetEvent(hDevCanDeleteEvent)
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT(\\?\USB#VID_15A2&PID_0054#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, _devices.size: 1
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, devInstPathToFind: USB\VID_15A2&PID_0054\6&28D53DA8&0&1, _deviceInstanceID: USB\VID_15A2&PID_0054\6&28D53DA8&0&1
ModuleID[2] LevelID[10]: DeviceClass::FindDeviceByUsbPath--DeviceListType_Current, Find the device
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT,[MxHidDeviceClass] vid_15a2&pid_0054, Hub:4-Port:1
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Fri Feb 05, 2016 8:17 am

ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_REMOVAL_EVT, Notify
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Remove
ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceRemoveEvent.
ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device remove1
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent()-DEVICE_REMOVAL_EVT, hDevCanDeleteEvent has been set
ModuleID[2] LevelID[10]: delete MxHidDevice[02A2AFF8]
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_066F&PID_37FF#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT(\\?\USB#VID_066F&PID_37FF#6&28d53da8&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed})
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - DEVICE_ARRIVAL_EVT,[Msc,DiskDeviceClass] vid_066f&pid_37ff, not handled
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - VOLUME_ARRIVAL_EVT(N)
ModuleID[2] LevelID[10]: DeviceManager::DevChangeWnd::OnDeviceChange() - end
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT(N)
ModuleID[2] LevelID[10]: VolumeDeviceClass::AddUsbDevice() N
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 5
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:5
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A11428
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 5
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:7
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A13FC8
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 5
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:4
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A1B368
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 5
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:6, Volume->_diskNumber:6
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A21308
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 5
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:5, Volume->_diskNumber:8
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:7, Volume->_diskNumber:8
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:4, Volume->_diskNumber:8
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:6, Volume->_diskNumber:8
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:8, Volume->_diskNumber:8
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02A2B0B0
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 1
ModuleID[2] LevelID[10]: VolumeDeviceClass::AddUsbDevice() successful N add to current list, retrycount: 0
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 1
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT-Disk(N), Hub:4-Port:1
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT, Notify
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume Arrive/Remove or Device Arrive/Remove
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, m_p_usb_port is not NULL, so only refresh
ModuleID[2] LevelID[10]: CmdOpreation[0]--OnDeviceChangeNotify, Volume/Device Arrive
ModuleID[2] LevelID[1]: CmdOpreation[0]--set m_hDeviceArriveEvent.
ModuleID[2] LevelID[10]: CmdOpreation[0]--WaitforEvents device arrive1
ModuleID[2] LevelID[10]: CmdOperation[0] device chagned and reset to state 1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 0 > /sys/block/mmcblk0boot0/force_ro
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is send
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ dd if=$FILE of=/dev/mmcblk0boot0 bs=1024 seek=1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 1 > /sys/block/mmcblk0boot0/force_ro
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo 8 > /sys/devices/platform/sdhci-esdhc-imx.3/mmc_host/mmc0/mmc0:0001/boot_config
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is send
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ tar xf $FILE
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ sh partitition-emmc.sh /dev/mmcblk0
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ mkfs.vfat /dev/mmcblk0p1 -L System
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ mkfs.ext4 -O ^has_journal -E stride=2,stripe-width=1024 -b 4096 /dev/mmcblk0p2 -L Storage
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ mkdir -p /mnt/mmcblk0p1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ mount -t vfat /dev/mmcblk0p1 /mnt/mmcblk0p1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=/mnt/mmcblk0p1/KERNEL
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=/mnt/mmcblk0p1/SYSTEM
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=/mnt/mmcblk0p1/imx6q-tbs2910.dtb
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=/mnt/mmcblk0p1/uEnv.txt
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is pipe dd of=/mnt/mmcblk0p1/oemsplash.png
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is frf
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ sync
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ ls -l /mnt/mmcblk0p1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ umount /mnt/mmcblk0p1
ModuleID[2] LevelID[10]: ExecuteCommand--Push[WndIndex:0], Body is $ echo Update Complete!
ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed
ModuleID[2] LevelID[10]: CCmdOpreation[0] thread is Closed
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - EVENT_KILL
ModuleID[2] LevelID[10]: CMyExceptionHandler::OnMsgExceptionEvent() - KillExceptionHandlerThread
ModuleID[2] LevelID[10]: Exception Handler thread is closed
ModuleID[2] LevelID[1]: delete MxHidDeviceClass
ModuleID[2] LevelID[10]: Device Manager thread is closed
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Fri Feb 05, 2016 1:09 pm

Vpeter

By the way. I downloaded this file and it works.
https://drive.google.com/file/d/0BxZbVn ... ef=2&pli=1

Only problem it is an early version of XBMC V13 Gotham

Regards
Sparkey 1000
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby sparkey1000 » Fri Feb 05, 2016 1:12 pm

I am trying to find a version of Kodi V15.2 ISENGARD that will work on my Matrix TBS2910 V2.3. A mfgTool2 files is required to be embedded in the file.

If anyone knows where to find this please let me know.

Regards
Sparkey 10000
sparkey1000
 
Posts: 17
Joined: Wed Jan 20, 2016 9:58 am

Re: OpenELEC 6.0.0 install question

Postby vpeter » Fri Feb 05, 2016 5:16 pm

sparkey1000, the file I posted works for me. Seems I'm the only user of it that's why I will not bother much with this platform.
mfgTool2 is included in every release I made. You can also copy it from matrixtv and adjust what you need.

If users would make much more feedback it would be great. Without this everything is just a guess. I assume there are NO users of this platform.
You can help me buy new work notebook with paypal donation, after 8 years it's time to upgrade.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FLVT7ACMYAPS6
vpeter
 
Posts: 427
Joined: Sun Jul 27, 2014 2:12 am
Location: Slovenia

Next

Return to Install and setup

Who is online

Users browsing this forum: No registered users and 4 guests