TBS 2910 V2.3 Switch Settings
Posted: Sat Feb 13, 2016 5:16 amDoes anyone have the SW6 4 position switch settings for the TBS 2910 V2.3.
I am trying to boot from an SD card.
I am trying to boot from an SD card.
TBSDTV Community Forum
Update & Support for TBS Products
https://www.tbsdtv.com/forum/
TBS 2910 V2.3 Switch Settings
Page 1 of 1
Posted: Sat Feb 13, 2016 5:16 amRe: TBS 2910 V2.3 Switch Settings
Posted: Sat Feb 13, 2016 4:23 pmI will be little malicious but you can have only 16 combinations with 4 pin dip switch right? So try one by one - it is few minutes work
Re: TBS 2910 V2.3 Switch Settings
Posted: Sun Feb 14, 2016 4:26 amI thought of that. However, this 4 position switch may be used by the factory to load firmware into various sections of the unit. Some switch combination could result in the corrupting of an internal firmware load and turn this computer into a BRICK. Best to know what the 2^4 =16 switch combinations do before messing with them.
Regards
Sparkey1000
Regards
Sparkey1000
Re: TBS 2910 V2.3 Switch Settings
Posted: Sun Feb 14, 2016 4:29 amI have a request into technical support for the schematic. They stated they are on holiday for a week and will get back to me after. We will see.