tbs6281 on ubuntu 14.0
Posted: Sat Oct 31, 2015 4:21 amHi,
I am it literate but have not much knowledge of linux.
I am using ubuntu 14.04.3, a clean install.
My motherboard is asus h110m-a.
My card is tbs6281.
-I have followed all instructions from here, from the manual, and from 3 days of googling, to the best of my ability but i cannot get this installed.
-I have downloaded the correct drivers. I have done the .v4l.sh thing, then make then make install, then remove old media.bak. This process works - the make takes a minute or two. Where appropriate ive done the sudo chmod -x folder etc. I reboot at end.
-Nothing shows after reboot eg sudo dmseg | grep frontend, sudo dmseg | grep registering.
sudo lsdvb brings error "ERROR:opening /sys/class/dvb directory".
sudo lspci does not show card in output
uname-a = 3.19.0-31-generic #36~14.04.1 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux **i see it says 14.04.1 but the iso ive used is 14.04.3
-Motherboard has latest bios. I have tried every motherboard setting relating to the appropriate slot. I have turned off fast boot. I can verify that the card is not faulty.
I have found my lack of knowledge at linux frustrating, the lack of clear concise instructions (that work), and the difficulty of installing a basic card. Can somebody PLEASE give me a set of instructions to install this on a clean ubuntu, or give me commands to test output or something
It would be much appreciated. Soon i am building a similar micro-computer for the other room and this is swaying my opinion on whether or not to buy the same card.
Thank you for reading, hope you can help
I am it literate but have not much knowledge of linux.
I am using ubuntu 14.04.3, a clean install.
My motherboard is asus h110m-a.
My card is tbs6281.
-I have followed all instructions from here, from the manual, and from 3 days of googling, to the best of my ability but i cannot get this installed.
-I have downloaded the correct drivers. I have done the .v4l.sh thing, then make then make install, then remove old media.bak. This process works - the make takes a minute or two. Where appropriate ive done the sudo chmod -x folder etc. I reboot at end.
-Nothing shows after reboot eg sudo dmseg | grep frontend, sudo dmseg | grep registering.
sudo lsdvb brings error "ERROR:opening /sys/class/dvb directory".
sudo lspci does not show card in output
uname-a = 3.19.0-31-generic #36~14.04.1 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux **i see it says 14.04.1 but the iso ive used is 14.04.3
-Motherboard has latest bios. I have tried every motherboard setting relating to the appropriate slot. I have turned off fast boot. I can verify that the card is not faulty.
I have found my lack of knowledge at linux frustrating, the lack of clear concise instructions (that work), and the difficulty of installing a basic card. Can somebody PLEASE give me a set of instructions to install this on a clean ubuntu, or give me commands to test output or something
It would be much appreciated. Soon i am building a similar micro-computer for the other room and this is swaying my opinion on whether or not to buy the same card.Thank you for reading, hope you can help