Moderator Control Panel ]

Moi+ freeze on "Starting Kernel."

Moi+ freeze on "Starting Kernel."

Postby Sailorboy » Thu Dec 01, 2016 12:45 am

Hi,

I'm very lost, since the last update of Moi+, I have the message "Starting Kernel." and nothing else.

If I try to turn off, plug usb stick, turn on... exactly the same "Startin Kernel.".

Please, tell me that you have an issue. :(
Sailorboy
 
Posts: 2
Joined: Sun Feb 28, 2016 12:38 am

Re: Moi+ freeze on "Starting Kernel."

Postby costan » Thu Dec 01, 2016 6:59 am

Sailorboy Wrote:Hi,

I'm very lost, since the last update of Moi+, I have the message "Starting Kernel." and nothing else.

If I try to turn off, plug usb stick, turn on... exactly the same "Startin Kernel.".

Please, tell me that you have an issue. :(



Use the cable on the UART port to connect on MOI+ console. It's a 7$ adapter from TBS shop, but I think you can easily build one by ourself using Google and your electric shop. This is the adapter:

http://shop.tbsdtv.com/rs232-to-uart-ad ... l?cPath=27

There's also an USB version, but basically it's a USB-Serial converter you can find in any electronic shop.
costan
 
Posts: 66
Joined: Sat Feb 21, 2015 8:30 am

Re: Moi+ freeze on "Starting Kernel."

Postby Sailorboy » Tue Dec 06, 2016 1:22 am

Thanks a lot Costan.

I have an Odroid C1, I think I can plug UART directly to the GPIO Ports.

But after that, can you explain me what the commands are ?

Thanks again. It's a very new world for me...
Sailorboy
 
Posts: 2
Joined: Sun Feb 28, 2016 12:38 am

Re: Moi+ freeze on "Starting Kernel."

Postby costan » Tue Dec 06, 2016 1:46 am

Sailorboy Wrote:Thanks a lot Costan.

I have an Odroid C1, I think I can plug UART directly to the GPIO Ports.

But after that, can you explain me what the commands are ?

Thanks again. It's a very new world for me...



Let's start plugging it and look for the boot sequence. I'm pretty sure that if it works you can recover the box with some uboot tweaking.
costan
 
Posts: 66
Joined: Sat Feb 21, 2015 8:30 am


Return to MOI+

Who is online

Users browsing this forum: No registered users and 4 guests

cron