TBSDTV Community Forum

One issue remains, not getting any entitlement updates.
Any suggestions?

I can't get it to work here! Really need help

Code: Select All Code

02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Sending:
02:11:00 7476EE70 r   (reader)   F4 D1 7F FE 7F
02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Reading 5 echoed transmitted chars...
02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Read timeout 9990000 us, read delay 0 us, to read 5 char(s), chunksize 5 char(s)
02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Receiving:
02:11:00 7476EE70 r   (reader)   F4 D1 7F FE 7F
02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Reading of echoed transmitted chars done!
02:11:00 7476EE70 r   (reader) Sky [mouse] IFD: Transmit succesful
02:11:00 7476EE70 r   (reader) Sky [mouse] IFD: ICC_Async_InvertBuffer: size=5 buf[0]=f4
02:11:00 7476EE70 r   (reader) Sky [mouse] IFD: Setting timeout to 14400 ETU (6002016 us)
02:11:00 7476EE70 r   (reader) Sky [mouse] IFD: Receive size 1 bytes, delay 0 us, timeout=6002016 us
02:11:00 7476EE70 r   (reader) Sky [mouse] IFD: RECEIVED:
02:11:00 7476EE70 r   (reader)   20
02:11:00 7476EE70 r   (reader) Sky [mouse] IO: Read timeout 6002016 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
02:11:06 7476EE70 r   (reader) Sky [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=6002016 us
02:11:06 7476EE70 r ERROR, function call crdr_ops->receive(reader, data, size, delay, timeout) returns error.
02:11:06 7476EE70 r   (reader) Sky [mouse] TRACE: ERROR: Protocol_T0_Command returns error
02:11:06 7476EE70 r   (reader) Sky [mouse] failed to read 7401 cmd length (00 00)
02:11:06 7476EE70 r   (reader) Sky [mouse] passed history check
02:11:06 7476EE70 r TA1 = 13
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r TA1 = 12
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r TA1 = 13
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r TA1 = 13
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r TA1 = 11
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r TA1 = 11
02:11:06 7476EE70 r FI = 01
02:11:06 7476EE70 r   (reader) Sky [mouse] card system not supported
02:11:06 7476EE70 r   (reader) Sky [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
02:11:06 7476EE70 r   (reader) Sky [mouse] card initializing error



Code: Select All Code

[reader]
label                         = Sky
description                   = Sky
protocol                      = mouse
device                        = /dev/ttyUSB0
#protocol                      = pcsc
#device                        = 0
#autospeed                     = 0
#cacheex                       = 1
caid                          = 0946
boxid                         = 158544CD
#ins7e11                       = 13
#fix07                         = 0
detect                        = cd
#mhz                           = 480
#cardmhz                       = 480
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
dropbadcws = 1


reader) Sky [mouse] card system not supported

it is like your CA card is not support ,you card is nds ?

Yes. After some trying and forcing NDS+, I get protocol errors.

Code: Select All Code

class48 ins52 failed
Protocol_T0_ExchangeTPDU
failed to read 7401 cmd length


after 7401 cmd length it stop the process. Any clue?

Is there a way to find the correct mhz and cardmhz?

Help please!

hi ,

please try this oscam .
http://oscam.dreamosat.net/index.php?ac ... -pc-linux&



best regards!

Oscam-emu pair with emulator reader. The problem remains with the physical reader remains. I don't know how to configure the file to work. Can you help me with examples?

Its getting me nuts! Please, I need some assistance.

Hello, I ordered one of these 3102, I have ubuntu 18.04 installed, do I need to install the drivers or not?
and if you have to install it, does anyone have the commands?

nborjas Wrote:Hello, I ordered one of these 3102, I have ubuntu 18.04 installed, do I need to install the drivers or not?
and if you have to install it, does anyone have the commands?

in linux do not need to install the driver