Moderator Control Panel ]

MOI+ no text on screen or sign of life after updating

MOI+ no text on screen or sign of life after updating

Postby kalashnikov » Mon Jul 25, 2016 6:04 am

hi

after several Attempts to update kernel and system my MOI+ stops working , no sing of life, no ip, no text on screen

i was triying to use it whit a TBS6205 on DVB-T2 (the TBS6205 works fine on a pc)
using this files to update https://sourceforge.net/projects/moiplu ... %2BV1.0.2/ system and kernel for DVB-T2

video
https://vid.me/nKTJ

any kind of help for this , some kind of serial recovery?

how i use UART port ?
kalashnikov
 
Posts: 6
Joined: Mon May 16, 2016 10:29 pm

Re: MOI+ no text on screen or sign of life after updating

Postby zhangchao » Mon Jul 25, 2016 6:30 pm

hi ,

How to Update MOI+?
1. Download the latest software (system, kernel) from: http://www.tbsdtv.com/download/
2. Copy the software that you want to update to a USB flash drive (mini 1GB,Please must use FAT16/32 format usb flash driver, do not use NTFS format usb flash driver), for example, if you just need to update the kernel, then download only the latest kernel and copy it to the USB flash drive root folder, if you copy all of the three files: system, kernel to the USB flash drive, MOI+ will update all of them and it will take a bit longer.
3. Make sure your MOI+ is powered off, connect the USB flash drive to it, and then power on, the update will start, on the LCD screen it displays: -"Welcome MOI+"- -When update the kernel it shows the kernel loading progress in percentage (%) -When update the system, it shows the system loading progress in percentage (%) and "Reading, please later..."
4. After the update completes (takes about 5 minutes), the IP address will be displayed on the LCD screen, make sure the network cable is connected.

NOTE: There is no need to restart MOI+ after the update. To check the version, you can go to the web user interface by entering the IP address displayed on the LCD screen to the address bard of the browser.
zhangchao
 
Posts: 30
Joined: Thu Jan 17, 2013 4:59 pm

Re: MOI+ no text on screen or sign of life after updating

Postby kalashnikov » Fri Jul 29, 2016 1:29 am

this is the same shit generic answer of the TBS suport

the DEVICE do not show noting on the LCD when i turn it on, whit or without Update USB, do not get any ip adress from DHCP server . . . .

the moi+ get bricked trying to update to 1.0.0.2 to detect a TBS6205 DVT-T2 using oficial bins . . . .

some real help answer? like how to update moi+ via UART ? any kind of Recovery process to folow?
kalashnikov
 
Posts: 6
Joined: Mon May 16, 2016 10:29 pm

Re: MOI+ no text on screen or sign of life after updating

Postby Sculptor » Fri Dec 16, 2016 3:11 pm

kalashnikov wrote:this is the same shit generic answer of the TBS suport

the DEVICE do not show noting on the LCD when i turn it on, whit or without Update USB, do not get any ip adress from DHCP server . . . .

the moi+ get bricked trying to update to 1.0.0.2 to detect a TBS6205 DVT-T2 using oficial bins . . . .

some real help answer? like how to update moi+ via UART ? any kind of Recovery process to folow?

Привет, у меня такая же проблема, получилось оживить?
Sculptor
 
Posts: 3
Joined: Tue Dec 06, 2016 2:03 pm


Return to MOI+

Who is online

Users browsing this forum: No registered users and 1 guest