I have this card acquired very recently directly from TBS, and Im installing it in Ubuntu 14.04.2 (kernel 3.16).
Everything seems ok in the system, but when I try to tune to some frequency, it doesnt work
lspci -vvv
- Code: Select All Code
04:00.0 Multimedia controller: Device 544d:6178
Subsystem: Device 6905:0001
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df100000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: TBS PCIE
dmesg:
- Code: Select All Code
[ 10.068503] TBS PCIE 0000:04:00.0: enabling device (0000 -> 0002)
[ 10.068650] TBS PCIE Detected TBS6905 Board Rev 1
[ 10.073088] DVB: registering new adapter (TBS PCIE DVB Adapter)
[ 10.326096] TurboSight TBS 6908 Frontend Attaching...
[ 11.414293] TurboSight TBS6908 DVB-S2 card adapter0 MAC=00:22:ab:69:08:01
[ 11.414300] DVB: registering adapter 0 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[ 11.414509] DVB: registering new adapter (TBS PCIE DVB Adapter)
[ 11.415090] TurboSight TBS 6908 Frontend Attaching...
[ 11.417797] TurboSight TBS6908 DVB-S2 card adapter1 MAC=00:22:ab:69:08:02
[ 11.417802] DVB: registering adapter 1 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[ 11.417907] DVB: registering new adapter (TBS PCIE DVB Adapter)
[ 11.577605] TurboSight TBS 6908 Frontend Attaching...
[ 12.597336] TurboSight TBS6908 DVB-S2 card adapter2 MAC=00:22:ab:69:08:03
[ 12.597343] DVB: registering adapter 2 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
[ 12.597566] DVB: registering new adapter (TBS PCIE DVB Adapter)
[ 12.598125] TurboSight TBS 6908 Frontend Attaching...
[ 12.600912] TurboSight TBS6908 DVB-S2 card adapter3 MAC=00:22:ab:69:08:04
[ 12.600916] DVB: registering adapter 3 frontend 0 (TurboSight TBS 6908 DVBS/S2 frontend)...
scan-s2 on astra 19.2E:
- Code: Select All Code
Network Name 'ASTRA 1'
dumping lists (7 services)
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28531:1:1068:0
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28550:1:1068:0
Cherie 25;Arqiva:11778:vC34M2O35S0:S19.2E:27500:1801:1804;1804:0:0:28551:1:1068:0
ZDF HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6110:6120=deu,6121=mis,6123=mul;6122=deu:6130:0:11110:1:1011:0
zdf_neo HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6310:6320=deu,6321=mis,6323=mul;6322=deu:6330:0:11130:1:1011:0
zdf.kultur HD;ZDFvision:11361:hC23M2O35S1:S19.2E:22000:6410:6420=deu,6421=mis,6423=mul;6422=deu:6430:0:11140:1:1011:0
Done.
When I try to tune on those scan-s2 frequencys, I get 100% SNR.
The driver version im using is tbs-linux-drivers_v150411.zip
Does anyone has any idea of what's wrong with this? I have never had this problem before.