Moderator Control Panel ]

Best settings in tvheadend for TBS6909x

Best settings in tvheadend for TBS6909x

Postby jku131 » Fri Feb 26, 2021 4:54 pm

Hello, I'm using tbs6909x card in tvheadend in mode 0 with quattro lnb.
Can somebody tell me what are best settings for tvheadend to get fast channel switching and good stability?
I see there are options like "Full DiseqC:", "Tune before DiseqC:", "Higher LNB voltage:", "Status period (ms):", "Input buffer (bytes):", "Skip initial bytes:".
How should I set this to get best stability and fast channel switching?
Do I need to enable "Full DiseqC:" when I have quattro lnb?
jku131
 
Posts: 5
Joined: Tue Aug 25, 2020 5:44 am

Re: Best settings in tvheadend for TBS6909x

Postby smile » Mon Mar 01, 2021 10:36 am

Hi
You can try set the "status period" to 3000 , "input buffer (bytes)" set to 10 times of dafult value .

Best Regards
smile
 
Posts: 164
Joined: Sun Oct 09, 2011 9:51 am

Re: Best settings in tvheadend for TBS6909x

Postby jku131 » Thu Mar 04, 2021 6:27 pm

Hi, thanks for response.

I'm currently using "Status period (ms):" 5000 and "Input buffer (bytes):" 188000, what are default values?
also what about "Skip initial bytes:", "Higher LNB voltage:", "Full DiseqC:", "Tune before DiseqC:" how should i set it to get best stability and fast channel switching?
jku131
 
Posts: 5
Joined: Tue Aug 25, 2020 5:44 am

Re: Best settings in tvheadend for TBS6909x

Postby crazycat » Sat Mar 06, 2021 4:35 am

Use default serrings
crazycat
 
Posts: 526
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov


Return to DVB-S2 Octa Tuner PCIe Card TBS6909

Who is online

Users browsing this forum: No registered users and 6 guests

cron