Unicable: Error scanning one mux in tvheadend

[ArraY]

I have two cards in my server. I config my two cards tbs6909 in mode unicable and each tunner is config according to the official manual (https://www.tbsiptv.com/download/tbs6909/tbs6909_user_guide.pdf):

I would like to add (for example) this Astra frequency:
19.2°E 11Astra 1L 10979.00 V 34 Astra 1L DVB-S QPSK 22000 5/6 ASTRA 1, 33.8 Mbps

But I get this error when I force the mux scan in tvheadend:

2018-01-11 19: 27: 39.817 mpegts: 10979V in MYSATELITE - tuning on TurboSight TBS 6909 DVB-S / S2 # 9: DVB-S # 0
2018-01-11 19: 27: 39.817 en50494: transponder value larger then 1023 for freq 1229000 (0)
2018-01-11 19: 27: 39.817 en50494: invalid tuning freq

The only difference with the manual is that Frequency I have not put anything (I have left it to 0) so that tuner takes me any frequency.

Why do you give me the error?

[daowei]

Hello,
Did you create the configuration to specify the tuner card work under mode2 first? like this:
#　vi /etc/modprobe.d/mxl58x.conf
mxl58x.conf: options mxl58x mode=2
reboot server after created this configuration.

Can you arrange a teamviewer? we'll set a remote to check.

Thanks

[ArraY]

Inside of file:

options mxl58x mode=2

Its ok? Or would be inside of file?

mxl58x.conf: options mxl58x mode=2

[ArraY]

I have changed what was inside the file:
options mxl58x mode = 2

For this:
mxl58x.conf: options mxl58x mode = 2

When I rebooted I lost the configuration of the cards:

root @ pc: / home / user # dmesg | grep TurboSight
root @ pc: / home / user #

But I put back:
options mxl58x mode = 2

and it has not been solved either. Now I have lost the configuration of the cards !!

root @ pc: / home / user # dmesg | grep TurboSight
root @ pc: / home / user #

root @ pc: / home / user # lspci -vvv | grep 6909
Subsystem: Device 6909: 0001
root @ pc: / home / user #

Help !!! Before if all the tuners would appear. Why have the 8 tuners been lost?

[ArraY]

I had to reinstall ubuntu 16.04 (4.13.0-26-generic)and all the drivers from pdf official manual tbs6909. I also followed the post viewtopic.php?f=176&t=24729 to block the kernel.

Right now I'm the same as before with this error in tvheadend:

2018-01-13 13: 14: 30.110 mpegts: 10729V in MYSATELLITE - tuning on TurboSight TBS 6909 DVB-S / S2 # 0: DVB-S # 0

2018-01-13 13: 14: 30.110 en50494: transponder value larger then 1023 for freq 979000 (0)

dmesg | grep frontend

[ 580.932662] TBSECP3 driver 0000:02:00.0: DVB: adapter 9 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.932937] TBSECP3 driver 0000:01:00.0: DVB: adapter 8 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.933177] TBSECP3 driver 0000:01:00.0: DVB: adapter 7 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.933414] TBSECP3 driver 0000:01:00.0: DVB: adapter 6 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.933658] TBSECP3 driver 0000:01:00.0: DVB: adapter 5 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.933914] TBSECP3 driver 0000:01:00.0: DVB: adapter 4 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.934149] TBSECP3 driver 0000:01:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000)
[ 580.934402] TBSECP3 driver 0000:01:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000)


Who can help me?

[ArraY]

I had to put the card as mode = 1, because also in unicable mode 2 I mixed the same channel with different frequencies (Horrible!). I'm really disappointed with this card.

[steven]

hi

When you are using with unicable the lock frequency you need to update too .and the unicable slot frequency value

thanks

Kind Regards

steven