Moderator Control Panel ]

TBS6909 Quattro lnb mode problem

TBS6909 Quattro lnb mode problem

Postby shirehorse99 » Mon Apr 20, 2020 4:20 pm

Hi guys

Can someone help me with this card please - only one of my 8 tuners offers me Quattro mode .the other 7 seem to work as standard tuners. Previously all 8 used to offer 4 ports .

The card is setup via 4 cables straight from lnb to the card - VL HL VH HH mode and I am able to scan all the channels on the correct 28.2e satellite.

But only 1 tuner is working correctly.

I’m using a tbs2951 amd-pro And 3 octo cards 1 6909 card and 2 6209 cards (which work perfectly )

Can someone remote in for me please from support and sort this out for me
Attachments
AE948C63-498C-4686-90DF-C622B1908E09.png
shirehorse99
 
Posts: 1
Joined: Mon Apr 20, 2020 9:14 am

Re: TBS6909 Quattro lnb mode problem

Postby daowei » Tue Apr 21, 2020 9:29 am

Hi,
For the quattro LNB, these 4 signal/cables which from LNB have been defined to VL, VH, HL, HH. Please find it out.
And for the default, TBS6909 4 input ports have also been defined to VL, VH, HL, HH (count from the port which near the PCIe interface). I'll share you a picture.
So, please make sure signal is connected to a corresponding port correctly:
LNB VL----TBS6909 VL; LNB VH-----TBS6909 VH; LNB HL------TBS6909 HH.

Another, if you have a Satellite Receiver (setup box), please test all 4 signals (VL, VH, HL, HH) is woking. If signal is ok, but TBS6909 still not working, please setup a remote check, Teamviewer is ok for us.

Thanks
Attachments
tbs6909_signal_connection.jpg
daowei
 
Posts: 137
Joined: Fri Aug 12, 2016 6:17 pm


Return to DVB-S2 Octa Tuner PCIe Card TBS6909

Who is online

Users browsing this forum: No registered users and 2 guests