6909 not scanning/working properly TVheadend
Posted: Sat May 21, 2016 12:57 am
i've just tried to scan with the first 4 tuners on 28.2e
not all services are found and it looks like 99% of the channels are all horizontal polorisation, like as if it's not switching the lnb to vertical?
i'm using mode 0, with 4x 4xdiseqc switches with 3 satellites.
Setup works fine with older cards.
in Tvheadend i have made each other tune a slave of the previous tuner.. is this what i should be doing for mode 0, or is this done invisibly with the drivers?
not all services are found and it looks like 99% of the channels are all horizontal polorisation, like as if it's not switching the lnb to vertical?
i'm using mode 0, with 4x 4xdiseqc switches with 3 satellites.
Setup works fine with older cards.
in Tvheadend i have made each other tune a slave of the previous tuner.. is this what i should be doing for mode 0, or is this done invisibly with the drivers?