WARNING: filter timeout pid

[mchakroun]

Hi,

When I try to scan I have this output, if I try 12090000 V 29700000 5/6 35 QPSK it works liek a charm. Someone can help me to figure out how to fix ?

Code: Select All Code

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder DVB-S  12129000 V 29700000 5/6 35 QPSK
initial transponder DVB-S2 12129000 V 29700000 5/6 35 QPSK
----------------------------------> Using DVB-S
>>> tune to: 12129:vC56M2O35S0:S0.0W:29700:
DiSEqC: uncommitted switch pos 0
DiSEqC: switch pos 0, 13V, hiband (index 2)
DVB-S IF freq is 1529000
>>> tuning status == 0x1F
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.


#uname -a
Linux 3.19.0-64-generic #72~14.04.1-Ubuntu SMP Fri Jun 24 17:59:48 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Regards

[guacharaca]

I do not know the answer. However to troubleshoot, two things I would try independently: 1) Change "hiband" to normal kuband in the adapter settings. 2) Figure out why you are getting "DVB-S IF freq is 1529000" when you typed in "29700000".