TBSDTV Community Forum

has anyone successfully got this to stream to a xtream code panel? it keeps dropping out every couple mins without fail, have plenty of bandwidth and using other brands work perfectly fine using the http protocol and using the latest 1.0.51 firmware any ideas?

Hi
could you tell the other brands, because I'm interested in having is work with wowza, or IPTV panel.

thanks

Hi

Please have a try with this new version V1.0.59
https://my.pcloud.com/publink/show?code ... pBvmXGL4Hy

Thanks

Kind Regards

steven

it lasted an extra minute before it drops, using same device source same connection but different encoder device had uptime of 6 hours were the tbs longest is 4 minutes ? maybe doesnt like out of network access?

HI freddy12

could you tell what brand you are using.and the model.
l'm interested in it.

thanks

pep Wrote:HI freddy12

could you tell what brand you are using.and the model.
l'm interested in it.

thanks

totally different device a dvb-t which isnt exactly as simple to stream but used it as example that connection works fine i flashed .26 firmware i found on here and it lasted over 40 mins but the picture was jumpy as shit, using .51 and .59 it lasts a total of 6 mins then just drops out



Can play the stream locally fine but when it goes onto xtream code panel it drops it quick smart, tried to even use dvblogic's dvblink to stream it thru every other stream ive tried works fine but not the one from tbs hdmi encoder, i only bought this device to use on the panel, xtream code recommends your products?




what is this used for? as in .26 firmware these were 0 but both latest firmwares have this ?
Interrupt number:
062755
Missing interrupt number:
02

pep Wrote:HI freddy12

could you tell what brand you are using.and the model.
l'm interested in it.

thanks

just tested an online link of a OUPREE brand hdmi encoder and it doesnt have the problems ive facing with this one.

Hi Freddy12

Thanks for your feedback can you have a try using rtsp with 2603 ?we are on working at our side too we set up the xtream-code server ,2603 using rtsp works well,and we will try our best to fix this issue when using http .

Thanks

Kind Regards

steven

steven Wrote:Hi Freddy12

Thanks for your feedback can you have a try using rtsp with 2603 ?we are on working at our side too we set up the xtream-code server ,2603 using rtsp works well,and we will try our best to fix this issue when using http .

Thanks

Kind Regards

steven

lads are doing great on the customer service very impressed, alright ive just set it up using rtsp and its solid streaming but the video is jumpy and jerky, ive used the exact same settings using http and its spot on, is there a difference between rtsp and http? the config ive uploaded below its just the basic settings from factory got tired of setting it custom with the resets i was doing haha

on follow up to my last message seems like rtsp isnt friendly with hevc, tried it with x254 and the jumping and jerkyness stopped