Moderator Control Panel ]

tbs2604 firmware Version 1.0.10.

tbs2604 firmware Version 1.0.10.

Postby webmotions » Sat Sep 01, 2018 6:15 pm

Hi, my firmware version is in the subject.
if you reset the settings, the encoder becomes to be unusable. The message "BFrameNum should be integer in 1-3" appears. That's the end of this encoder. Consequently HDMI main stream settings can't be saved. Have you ever done a basic, very basic test ?

Regards
Attachments
bug.jpg
webmotions
 
Posts: 9
Joined: Mon Dec 19, 2016 4:19 am

Re: tbs2604 firmware Version 1.0.10.

Postby daowei » Sat Oct 06, 2018 11:40 am

webmotions Wrote:Hi, my firmware version is in the subject.
if you reset the settings, the encoder becomes to be unusable. The message "BFrameNum should be integer in 1-3" appears. That's the end of this encoder. Consequently HDMI main stream settings can't be saved. Have you ever done a basic, very basic test ?

Regards


Hi,
This message reminds you that you must enter some valuse for "BFrameNum" blank. Your firmware is too olde, the latest is version 1.1.87, we have many improvements in this version, Please try.
Upgrade setps:
1> Unpack the zip file "tbs2603_firmware_v1.1.87.zip"
2> Upload the file "update.tar.bz2"
3> Start to upgrade until it says "upgrade is successful"

Any question please update to me or write to me, my e-mail "daowei@tbsdtv.com".

Thanks
daowei
 
Posts: 137
Joined: Fri Aug 12, 2016 6:17 pm

Re: tbs2604 firmware Version 1.0.10.

Postby daowei » Sat Oct 06, 2018 11:45 am

daowei Wrote:
webmotions Wrote:Hi, my firmware version is in the subject.
if you reset the settings, the encoder becomes to be unusable. The message "BFrameNum should be integer in 1-3" appears. That's the end of this encoder. Consequently HDMI main stream settings can't be saved. Have you ever done a basic, very basic test ?

Regards


Hi,
This message reminds you that you must enter some valuse for "BFrameNum" blank. Your firmware is too olde, the latest is version 1.1.87, we have many improvements in this version, Please try.
Upgrade setps:
1> Unpack the zip file "tbs2603_firmware_v1.1.87.zip"
2> Upload the file "update.tar.bz2"
3> Start to upgrade until it says "upgrade is successful"

Any question please update to me or write to me, my e-mail "daowei@tbsdtv.com".

Thanks


Hi,
Again, the new firmware please check my attachment.

Thanks
Attachments
tbs2603_firmware_v1.1.87.zip
firmware v1.1.87 for TBS2603
(3.04 MiB) Downloaded 250 times
daowei
 
Posts: 137
Joined: Fri Aug 12, 2016 6:17 pm


Return to TBS2603 Professional HD Video Encoder

Who is online

Users browsing this forum: No registered users and 2 guests