Page 1 of 1
FW 1.1.96
Posted:
Sun Jun 02, 2019 1:24 pmby webmotions
What did you fix with this version?
Any news about faacebooks RTMPS (secure protocol) support?
Re: FW 1.1.96
Posted:
Thu Jun 06, 2019 11:31 amby daowei
Hi,
For RTMPS, i'll talk with my software Engineer, maybe not so quick to support.
We have another model named TBS2605, it already supports RTMPS, and also supoprts 4K_30fps (same as TBS2604). And even TBS2605 supports 2-channel 4K per unit. You can have a look:
https://www.tbsdtv.com/products/tbs2605 ... coder.htmlThanks
Re: FW 1.1.96
Posted:
Sun Jun 23, 2019 8:55 pmby DrCool
Sorry to say that FW 1.1.96 gives me periodic (about every second) jerking movements. image freezes briefly and jumps ahead to the correct frame. I reinstalled FW 1.1.87 with my usual parameters and everything is fine again.
Re: FW 1.1.96
Posted:
Thu Jun 27, 2019 10:48 amby daowei
Hi,
Which protocol you're testing? all protocols have this problem?
For RTMPS, maybe we'll add support in the future.
Thanks
Re: FW 1.1.96
Posted:
Wed Oct 02, 2019 1:58 pmby nixs
Hi.
I have a problem with this firmware, that for some time when it starts I cannot view any of input HDMI (first or second).
I tried to disable second - the same. One thing I must do to work is just click APPLY (whatever which bookmark) not changes anything.
What am I doing wrong? Maybe any of the option?
And one question: how many connection could be at the same time to one stream? Is there a limit?
thnx for any advice.
nixs
Re: FW 1.1.96
Posted:
Tue Oct 08, 2019 11:03 amby iie
nixs Wrote:Hi.
I have a problem with this firmware, that for some time when it starts I cannot view any of input HDMI (first or second).
I tried to disable second - the same. One thing I must do to work is just click APPLY (whatever which bookmark) not changes anything.
What am I doing wrong? Maybe any of the option?
And one question: how many connection could be at the same time to one stream? Is there a limit?
thnx for any advice.
nixs
I have the same problem please give
Re: FW 1.1.96
Posted:
Thu Oct 10, 2019 9:34 amby daowei
Hi nixs,
So maybe you can install back to older v1.1.87 first, we'll check why v1.1.96 not working well.
For the connection, the limit is about 10. Becasue this is based on ARM platform and for source device capture only, not a Server, can't handle so many requests.
You can Encoder---IP out----import to encoder stream to these softwares which supports "concurrent requests" like Flussonic, and ect.
Thanks
Thanks