Moderator Control Panel ]

TBS6522 unicable support

TBS6522 unicable support

Postby oldgringo » Sun Sep 23, 2018 11:08 pm

Does TBS6522 support unicable LNB?
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby oldgringo » Wed Sep 26, 2018 6:40 am

Simple question, 17 views, no answer? :?
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby steven » Thu Sep 27, 2018 9:28 am

yes no problem ,unicable is send diseqc command just need software support which application you are using ?
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Re: TBS6522 unicable support

Postby oldgringo » Fri Sep 28, 2018 7:29 am

DvbViewer. I can't get working even TransEdit, still no signal from lnb.
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby steven » Sun Sep 30, 2018 10:28 am

Hi

Please have a try with DVBDream :
http://www.tbsiptv.com/download/common/dvbdream_oem_version_setup_v2952.zip

Thanks

Kind Regards

steven
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Re: TBS6522 unicable support

Postby oldgringo » Mon Oct 01, 2018 6:52 am

Does it really support unicable including support of multiple sat. positions or only basic unicable LNB support (power + userband)? What version of unicable is supported? Because I cannot see diseqc changes for A/B/C/D (not even A/B) here. I am trying 2/4 sat positions (both unicable I & II) but no luck.
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby daowei » Tue Oct 09, 2018 11:20 pm

oldgringo Wrote:Does it really support unicable including support of multiple sat. positions or only basic unicable LNB support (power + userband)? What version of unicable is supported? Because I cannot see diseqc changes for A/B/C/D (not even A/B) here. I am trying 2/4 sat positions (both unicable I & II) but no luck.


Hi,
Sorry for delay.
Yes, this tuner card did support Unicable & multiple satellite. For DVBdream, the Diseqc setting like this:
1> Go to option "Option"-----"Diseqc".
2> Here you can set Diseqc for "multiple satellite" and also "Unicable". More detailed, please check my attachments.

For the Unicable, Unicable I "SCR 0-7 EN50494 is working". But Unicable II "EN50607" not sure, need to test. Any question you'd better write to us directly:
support@tbsdtv.com
daowei@tbsdtv.com

Thanks
Attachments
Diseqc_setting.zip
(117.76 KiB) Downloaded 357 times
daowei
 
Posts: 137
Joined: Fri Aug 12, 2016 6:17 pm

Re: TBS6522 unicable support

Postby oldgringo » Thu Oct 18, 2018 2:44 am

I sent an email on Sunday but no reaction since then :!:

The driver is hard to capable unicable II if there are only unicable I user bands in the settings. The driver under windows 10 is - simply said - UGLY. Veeeery slow, action to tune request is more less accidental. Once I changed the diseqc switch to more than simple diseqc the driver didn't responding to tune commands. I am very disappointed from this buy. From >160 Euro card I would expect way different level of support. It's the worst supported pcie card I tested for the last ten years. I have to say it is a real shame. :evil:
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby oldgringo » Sun Oct 28, 2018 2:28 am

2 weeks later - no response. :(
oldgringo
 
Posts: 13
Joined: Thu Sep 20, 2018 2:35 pm

Re: TBS6522 unicable support

Postby steven » Fri Nov 02, 2018 11:26 am

My colleague reply you last month but not get reply yet
Hi,
Please prepare a teamviewer, we'll check for you. I also invited our driver Engineer join us,
that will be helpful.

Thanks

daowei@tbsdtv.com

please have a check

Thanks

Kind Regards
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Next

Return to TBS6522 Multi-standard Dual Tuner PCI-e Card

Who is online

Users browsing this forum: No registered users and 3 guests

cron