TBSDTV Community Forum

Does TBS6522 support unicable LNB?

Simple question, 17 views, no answer?

yes no problem ,unicable is send diseqc command just need software support which application you are using ?

DvbViewer. I can't get working even TransEdit, still no signal from lnb.

Hi

Please have a try with DVBDream :
http://www.tbsiptv.com/download/common/dvbdream_oem_version_setup_v2952.zip

Thanks

Kind Regards

steven

Does it really support unicable including support of multiple sat. positions or only basic unicable LNB support (power + userband)? What version of unicable is supported? Because I cannot see diseqc changes for A/B/C/D (not even A/B) here. I am trying 2/4 sat positions (both unicable I & II) but no luck.

oldgringo Wrote:Does it really support unicable including support of multiple sat. positions or only basic unicable LNB support (power + userband)? What version of unicable is supported? Because I cannot see diseqc changes for A/B/C/D (not even A/B) here. I am trying 2/4 sat positions (both unicable I & II) but no luck.

Hi,
Sorry for delay.
Yes, this tuner card did support Unicable & multiple satellite. For DVBdream, the Diseqc setting like this:
1> Go to option "Option"-----"Diseqc".
2> Here you can set Diseqc for "multiple satellite" and also "Unicable". More detailed, please check my attachments.

For the Unicable, Unicable I "SCR 0-7 EN50494 is working". But Unicable II "EN50607" not sure, need to test. Any question you'd better write to us directly:
support@tbsdtv.com
daowei@tbsdtv.com

Thanks

I sent an email on Sunday but no reaction since then

The driver is hard to capable unicable II if there are only unicable I user bands in the settings. The driver under windows 10 is - simply said - UGLY. Veeeery slow, action to tune request is more less accidental. Once I changed the diseqc switch to more than simple diseqc the driver didn't responding to tune commands. I am very disappointed from this buy. From >160 Euro card I would expect way different level of support. It's the worst supported pcie card I tested for the last ten years. I have to say it is a real shame.

2 weeks later - no response.

My colleague reply you last month but not get reply yet
Hi,
Please prepare a teamviewer, we'll check for you. I also invited our driver Engineer join us,
that will be helpful.

Thanks

daowei@tbsdtv.com

please have a check

Thanks

Kind Regards