Moderator Control Panel ]

Diseqc reset during blind scan!

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Sat Oct 15, 2016 1:53 am

mjahabarsadiq Wrote:
luchy Wrote:11050 V 29999 DVB-S2/8PSK 3/5 SNR:12.0 dB 53.398 Mbit/s - Working fine
11050 H 29999 DVB-S2/8PSK 5/6 SNR:13.4 dB 74.368 Mbit/s - Working fine
11163 V 49999 DVB-S2/8PSK 2/3 SNR:12.8 dB 89.143 Mbit/s - Not working
11483 V 49999 DVB-S2/8PSK 2/3 SNR:12.0 dB 89.143 Mbit/s - Not working
11608 V 43979 DVB-S2/8PSK 2/3 SNR:11.4 dB 87.122 Mbit/s - Not working
11609 H 49999 DVB-S2/8PSK 2/3 SNR:12.3 dB 89.143 Mbit/s - Not working

The above not working TPS are very near its maximum linit speed 90Mbit/s, I think that's why they are lost package.



Yes, it could be the reason. What is the solution for this luchy? Any fix to handle at least till 90Mbit/s (as per your its technical spec said by you) properly? I don't want the videos of those channels but at least would like to scan those channels properly with full channel names and other parameters instead of scanning them as Nameless channels and sometimes not even scanning channels from those TPs. Please try to address at lease this.


Thanks,
Sadiq



Any updates? Also, which other USB device from TBS can support more than 100 Mbit/s?
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

Re: Diseqc reset during blind scan!

Postby crazycat » Sat Oct 15, 2016 2:02 am

all single-tuner with Cypress FX2 USB controller and parallel TS bus
crazycat
 
Posts: 527
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Sat Oct 15, 2016 7:30 pm

crazycat Wrote:all single-tuner with Cypress FX2 USB controller and parallel TS bus



Any specific model in TBS?
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

Re: Diseqc reset during blind scan!

Postby crazycat » Sat Oct 15, 2016 7:45 pm

5922(se), 5980, 5925
crazycat
 
Posts: 527
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Sat Oct 15, 2016 8:43 pm

crazycat Wrote:5922(se), 5980, 5925



Thanks for the info bro.. I was about to buy 5922 (SE) but it was not available so I went for 5990 :(

Now, no other option to get this working in 5990? At least reading the TPs which are closer to 90 Mbit/s (like 89.5)? I just want to scan the TPs and get the channels with full names and with all parameters. I am fine even if the video is not playing..

Or Can I get 5922 SE somewhere?

Thanks,
Sadiq
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Wed Oct 19, 2016 6:05 pm

I found a place to buy 5922 SE. Will it definitely handle more than 100 Mbit/s? If yes, I am planning to buy it. Please confirm guys.
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

Re: Diseqc reset during blind scan!

Postby crazycat » Thu Oct 20, 2016 2:18 am

Yes and inside same tuner/demod av2012/tas2101
crazycat
 
Posts: 527
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Thu Oct 20, 2016 3:11 am

crazycat Wrote:Yes and inside same tuner/demod av2012/tas2101



Bro, sorry that I am not having much knowledge in this. I understand your answer "Yes" to buy the card. But what do you mean by av2012/tas2101? Is it possible to show some light by explaining this?
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

Re: Diseqc reset during blind scan!

Postby crazycat » Fri Oct 21, 2016 2:44 am

av2012/tas2101 is tuner/demod chips used in 5990 and 5922SE.
crazycat
 
Posts: 527
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Diseqc reset during blind scan!

Postby mjahabarsadiq » Fri Oct 21, 2016 1:09 pm

crazycat Wrote:av2012/tas2101 is tuner/demod chips used in 5990 and 5922SE.



Thanks crazycat..
mjahabarsadiq
 
Posts: 32
Joined: Wed Sep 14, 2016 11:34 am

PreviousNext

Return to Windows

Who is online

Users browsing this forum: No registered users and 1 guest

cron