Page 1 of 3
TBS6590 and Windows 10
Posted:
Sat May 04, 2019 3:05 pm
by farsan
I installed the card in my PC and added the proper drivers.
I can get all the free channels but not any scrambled at all!
I am not able to access the CI menu. I use MediaPortal with the latest update.
I also tried the card with DVBdream but with the same result.
Any with the same problem?
Re: TBS6590 and Windows 10
Posted:
Wed May 08, 2019 6:08 pm
by steven
Hi Farsan
Which version of DVBDream you are using ? please send email to our suppport the best is setup the
remote we will havea check
Thanks
Kind Regards
steven
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 12:53 am
by farsan
When using MCE CI Tool v1.0.0.10 I get the message that it can´t find any card!
I am using MediaPortal primary. MP can find the card but not the CAM!
Regards
//Folke
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 11:51 am
by steven
Hi
MCE tool is for windows media center if you use mediaport then do not need to use this
please download this dll
https://www.tbsiptv.com/download/common ... .0.2.2.zipand replace the mediaportal one or use this latest version of DVBDReam :
https://www.tbsiptv.com/download/common ... _v2959.zipthanks
Kind Regards
steven
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 3:11 pm
by farsan
Hi!
I tried the new .dll but there is no change, Only unencrypted channels.
I don´t intend to change my viewer because I use a setup with one separate TV-server which distribute to different clients in my home.
I also have two other cards for this purpose from DVBSky which are working well.
But I certainly would like to use my TBS6590 in the setup.
Regards
//Folke
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 6:35 pm
by steven
Hi
using DVBDream just for testing the CI check whether is ok ,and we are on checking with MP check whether can get some information
any update we will send here
Thanks
KindRegards
steven
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 7:19 pm
by farsan
Ok!
Will do!
//Folke
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 7:58 pm
by farsan
Hi!
Tried the Viewer you sent but with no success!
I get an error code 5 and a message saying it can´t find any DVB hardware!
If I use MediaPortal I can access the card and scan for channels. Then I can see a list of all channels including the scrambled ones.
But I can only watch the unscrambled ones.
//Folke
Re: TBS6590 and Windows 10
Posted:
Thu May 09, 2019 8:09 pm
by farsan
Hi!
For information:
My motherboard is ASUS PRIME H370/B360
//Folke
Re: TBS6590 and Windows 10
Posted:
Fri May 10, 2019 9:59 am
by steven
HI
\when you using DVBDream do you have stop the MP service ?
is it possiblem send email to our support and setup a remote we will have a remote check
thanks
KindRegards
steven