streaming isdb-t setup with tvheadend using tbs6814
Posted: Fri Jan 31, 2020 12:41 amHi guys , im trying to set my tvh server to stream isdb-t signal over my lan network.
This is what I have:
tvh 4.2.7 daemon running on centos7 server.
tbs6814 pci board (drivers installed).
This what I did:
1
add new network:
name: TDA
type: ISDB-T
Pre-defined muxes:Ar-Argentina
save(This automatically adds 55 muxes.)
2
Under TV adapters , I can choose between 4 adapters related to my tbs6814 (dont know why there are 4).
click (tryed on all devices), set enable, set my TDA network and save.
This is the result:
At the muxes section I can see is showing FAIL for all the frequencies.
Questions:
Is my preceadure ok? There are so many checks and options ... perhaps there is something missing.
Is there any tutorial / documentation to follow ? (I can not find it on tvh docs).
Is there some whay to see the received signal level?
btw: mine is a tbs6814, I didnt kwnow if posting here is ok.
Regards,
Leandro
This is what I have:
tvh 4.2.7 daemon running on centos7 server.
tbs6814 pci board (drivers installed).
This what I did:
1
add new network:
name: TDA
type: ISDB-T
Pre-defined muxes:Ar-Argentina
save(This automatically adds 55 muxes.)
2
Under TV adapters , I can choose between 4 adapters related to my tbs6814 (dont know why there are 4).
click (tryed on all devices), set enable, set my TDA network and save.
This is the result:
At the muxes section I can see is showing FAIL for all the frequencies.
Questions:
Is my preceadure ok? There are so many checks and options ... perhaps there is something missing.
Is there any tutorial / documentation to follow ? (I can not find it on tvh docs).
Is there some whay to see the received signal level?
btw: mine is a tbs6814, I didnt kwnow if posting here is ok.
Regards,
Leandro