Moderator Control Panel ]

For the ECP3 cards i2c error ,packet loss solution

TBS6301 HDMI Video Capture Card with HDMI1.4 port, completely support full HD Video and Audio capture and playback. It provides HDMI input of highest quality, and meets the HDMI 1.4 standard, satisfies the 1080i resolutions and can capture the LPCM audio signals in HDMI, you can easily capture signals from different kinds of devices by TBS6301 HDMI Capture Card without limitation. For TBS6301 windows driver is BDA architecture compatible with DVBDream,DVBView,... ,Linux driver is V4l architecture compatible with dvblast,tvheadend,astra..

For the ECP3 cards i2c error ,packet loss solution

Postby steven » Thu May 23, 2019 9:48 am

Hi All

As we received some feedback when use the new TBS ECP3 card sometimes have i2c error or packet loss issue . then please try like this :

1.Set your BIOS PCI-E slot configuration to Gen1

2.set the GRUB like this
/etc/default/grub:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash reboot=efi,pci pci=nomsi,noaer"

3.disable the MSI in open source driver :
linux_media/drivers/media/pci/tbsecp3/tbsecp3-core.c

//static bool enable_msi = true; //annotation this line
thanks
Andreas tips if you compile failded then you can use like this :
static bool enable_msi = false;

module_param(enable_msi, bool, 0444);
MODULE_PARM_DESC(enable_msi, "use an msi interrupt if available");

then compile the driver and install reboot your PC to load the new setting .

test again if you have any more issue please send email to our support@tbsdtv.com or you can leave message here

Thanks

Kind Regards

steven
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Return to TBS6301 HDMI Capture Card

Who is online

Users browsing this forum: No registered users and 3 guests