I've successfully installed the drivers (Gentoo 2.6.35-r15).
After reading some of the other posts on this forum I've successfully got szap-s2 tuning:
- Code: Select All Code
mediacentre szap-s2 # ./szap-s2 -a 2 -H -c ../bbc1london.conf -S 0 "BBC 1 London;BSkyB"
reading channels from file '../bbc1london.conf'
zapping to 1 'BBC 1 London;BSkyB':
delivery DVB-S, modulation QPSK
sat 0, frequency 10773 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35
vpid 0x1388, apid 0x1389, sid 0x138b
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
status 1f | signal 74% | snr 87% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 97% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 98% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 98% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 97% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 98% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 98% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal 74% | snr 98% | ber 0 | unc 0 | FE_HAS_LOCK
bb1london.conf contains:
- Code: Select All Code
BBC 1 London;BSkyB:10773:hC56M2O35S0:S28.2E:22000:5000:5001=eng,5002=NAR:5003:0:6301:2:2045:0
However, I'm struggling to get scan-s2 to scan for channels:
- Code: Select All Code
mediacentre scan-s2 # ./scan-s2 -a 2 ../astra_scan-s2.conf
API major 5, minor 1
scanning ../astra_scan-s2.conf
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
initial transponder DVB-S 10773000 H 22000000 5/6 35 QPSK
initial transponder DVB-S 11778000 V 27500000 3/4 35 QPSK
initial transponder DVB-S2 11362000 H 22000000 2/3 35 8PSK
----------------------------------> Using DVB-S
>>> tune to: 10773:hC56M2O35S0:S0.0W:22000:
DVB-S IF freq is 1023000
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
----------------------------------> Using DVB-S
>>> tune to: 11778:vC34M2O35S0:S0.0W:27500:
DVB-S IF freq is 1178000
WARNING: >>> tuning failed!!!
>>> tune to: 11778:vC34M2O35S0:S0.0W:27500: (tuning failed)
DVB-S IF freq is 1178000
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
>>> tune to: 11362:hC23M5O35S1:S0.0W:22000:
DVB-S IF freq is 1612000
WARNING: >>> tuning failed!!!
>>> tune to: 11362:hC23M5O35S1:S0.0W:22000: (tuning failed)
DVB-S IF freq is 1612000
WARNING: >>> tuning failed!!!
dumping lists (0 services)
Done.
astra_scan-s2.conf contains:
- Code: Select All Code
S1 10773000 H 22000000 5/6 35 QPSK
S1 11778000 V 27500000 3/4 35 QPSK
S2 11362000 H 22000000 2/3 35 8PSK
Can anyone point me in the correct direction? I believe the fact that szap is getting a lock implies the card is successfully tuning.
Look forward to hearing from anyone who can help!
Regards,
Euge