Moderator Control Panel ]

CLI manual

CLI manual

Postby KermitT » Fri Nov 22, 2019 3:51 am

Is there a manual available on how to configure and start/stop encoder streams using the command line interface?
I'd like to control the encoder using shell scripts and the telnet interface. But I'm unaware of the CLI features, available commands and their configurable options.
Device: TBS-2604, Firmware version: 1.0.11 (factory default)
KermitT
 
Posts: 5
Joined: Thu Nov 21, 2019 7:48 am

Re: CLI manual

Postby echomay » Fri Nov 22, 2019 2:42 pm

Hi,
You can mail to me: "echo@tbsdtv.com", and we can discuss this problem in the details.
echomay
 
Posts: 75
Joined: Tue Apr 26, 2016 9:24 am

Re: CLI manual

Postby KermitT » Tue Nov 26, 2019 1:09 am

Thanks for the direct support offer, I'll probably switch to e-mail once it gets very specific. But I'll go ahead and post the basic questions here as I think the answers might be of interest for others,too:
1) What are the telnet login credentials? Login fails when using the Web UI username/password combo (root/root).
Device: TBS-2604, Firmware version: 1.0.11 (factory default)
KermitT
 
Posts: 5
Joined: Thu Nov 21, 2019 7:48 am

Re: CLI manual

Postby echomay » Tue Nov 26, 2019 4:11 pm

Hi,
Sorry, the telnet passwd not a public or basic information, we need to know some details and not open it to every one.
echomay
 
Posts: 75
Joined: Tue Apr 26, 2016 9:24 am


Return to TBS2604 / TBS2640 4K UHD HD H.265 & H.264 HDMI Video Encoder

Who is online

Users browsing this forum: No registered users and 4 guests