Is there a manual available on how to configure and start/stop encoder streams using the command line interface?
I'd like to control the encoder using shell scripts and the telnet interface. But I'm unaware of the CLI features, available commands and their configurable options.
CLI manual
4 posts
• Page 1 of 1
CLI manual
by KermitT » Fri Nov 22, 2019 3:51 am
Device: TBS-2604, Firmware version: 1.0.11 (factory default)
- KermitT
- Posts: 5
- Joined: Thu Nov 21, 2019 7:48 am
Re: CLI manual
by echomay » Fri Nov 22, 2019 2:42 pm
Hi,
You can mail to me: "echo@tbsdtv.com", and we can discuss this problem in the details.
You can mail to me: "echo@tbsdtv.com", and we can discuss this problem in the details.
- echomay
- Posts: 75
- Joined: Tue Apr 26, 2016 9:24 am
Re: CLI manual
by KermitT » Tue Nov 26, 2019 1:09 am
Thanks for the direct support offer, I'll probably switch to e-mail once it gets very specific. But I'll go ahead and post the basic questions here as I think the answers might be of interest for others,too:
1) What are the telnet login credentials? Login fails when using the Web UI username/password combo (root/root).
1) What are the telnet login credentials? Login fails when using the Web UI username/password combo (root/root).
Device: TBS-2604, Firmware version: 1.0.11 (factory default)
- KermitT
- Posts: 5
- Joined: Thu Nov 21, 2019 7:48 am
Re: CLI manual
by echomay » Tue Nov 26, 2019 4:11 pm
Hi,
Sorry, the telnet passwd not a public or basic information, we need to know some details and not open it to every one.
Sorry, the telnet passwd not a public or basic information, we need to know some details and not open it to every one.
- echomay
- Posts: 75
- Joined: Tue Apr 26, 2016 9:24 am
4 posts
• Page 1 of 1
Return to TBS2604 / TBS2640 4K UHD HD H.265 & H.264 HDMI Video Encoder
Who is online
Users browsing this forum: No registered users and 2 guests