Page 2 of 3

Re: Minimally required level of signal for HD channels.

PostPosted: Wed Apr 20, 2011 6:09 pm
by luchy
My TV Philips 46PFL5606 has delay for AC3 synchronization about 1-2 sec

maybe it is the problem, sound and video are not synchronized.
dvb card display more serious than TV.

Re: Minimally required level of signal for HD channels.

PostPosted: Wed Apr 20, 2011 8:02 pm
by vasvi
luchy wrote:
My TV Philips 46PFL5606 has delay for AC3 synchronization about 1-2 sec

maybe it is the problem, sound and video are not synchronized.
dvb card display more serious than TV.

Not, it is not the cause of problems.
I have tried to pass sound from HTPC directly to my Pioneer audio receiver VSX-515 (which is certified under the DD standard) via optical SPDIF interface - absolutely the same behavior as on TV.
I think the video and audio stream from sat is very well synchronized ;)
Probably dvb card introduces some mistiming?

Re: Minimally required level of signal for HD channels.

PostPosted: Wed Apr 20, 2011 8:08 pm
by vasvi
Luchy,
I have sent PrivatMassage to you, please, see it.

Re: Minimally required level of signal for HD channels.

PostPosted: Thu Apr 21, 2011 2:34 am
by vasvi
I have checked several others transponders - errors exist on all of them and quantity of errors is almost the same.

Re: Minimally required level of signal for HD channels.

PostPosted: Thu Apr 21, 2011 11:15 am
by luchy
please check TransEdit in attachments

Re: Minimally required level of signal for HD channels.

PostPosted: Thu Apr 21, 2011 4:55 pm
by vasvi
luchy wrote:please check TransEdit in attachments

Here you are:
error011.jpg

error022.jpg

error033.jpg

Re: Minimally required level of signal for HD channels.

PostPosted: Thu Apr 21, 2011 4:56 pm
by vasvi
error044.jpg

error055.jpg

error066.jpg


The same missing packets from ALL transponders dvbs or dvbs2!

Re: Minimally required level of signal for HD channels.

PostPosted: Fri Apr 22, 2011 10:07 am
by luchy
hi vasvi,
i send a private message to you.pls check it.

Re: Minimally required level of signal for HD channels.

PostPosted: Thu Jun 09, 2011 1:34 am
by vasvi
Hello Luchi and Steven,
Finally I received replacement - new 6921 tuner.
But to my great regret it works absolutely the same as previous. :(
Now I can summarize the problem:
- signal level and quality is displayed as perfect;
- changing the tuner did not resolve the problem;
- I changed LNB on my sat dish and it led to nothing;
- I tried to install 6921 in absolutely different PC (with different motherboard, processor, etc.) and got nothing;
- finally I took my HTPC (with 6921) to my friends place to check it with his sat dish (another point of installation, another LNB, another coax cable) and again I got bad results.
All these facts give me an excuse to talk about a faulty driver or global issues to 6921 hardware.

I am looking forward to yours solution of this problem! :roll:

PS: Good news - new version of TBS BS Tool with new driver pleased me. Now it works perfect and finds all active transponders from 36e sat.

Re: Minimally required level of signal for HD channels.

PostPosted: Tue Jun 21, 2011 3:03 am
by vasvi
Luchi, Steven,
Any answers?
Do you work on the problem?