TBSDTV Community Forum

TBS6508

In TBS6909 i have an only cable for working with the 8 adapters.

Is it possible to share an input between different input like in the tbs6909? O, do i have to connect 4 cables of the same signal?

Thanks you very much

Hi sir
if you using dvbs/s2 mode , you need connect to 4 signal cable, one signal cable for two adapter. it is different with 6909.
if you using dvb-t or dvbc signal. you just need 1 *signal cable. connect to "RF IN" port.

Best Regards

smile Wrote:Hi sir
if you using dvbs/s2 mode , you need connect to 4 signal cable, one signal cable for two adapter. it is different with 6909.
if you using dvb-t or dvbc signal. you just need 1 *signal cable. connect to "RF IN" port.

Best Regards

Ok, thanks