Mediaset is back on TBS6925 (and 5925)
If anybody didn't noticed yet - few days ago
crazycat released CrazyScan and StreamReaderEx-BDA with PLS support (Physical Layer Scrambling). Thanks to this there is possibility to view Mediaset from 13°E again and also hidden RAI package from 5°W.
Details:
-
http://rickcaylor.websitetoolbox.com/po ... stcount=43-
http://forum.satkurier.pl/viewtopic.php ... 64#p669027 (in Polish - sorry
)
List of frequiencies that can be received
13°E
- 11,334 GHz, pol. H, SR: 27500, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS: 1, 2 (Mediaset)
- 11,373 GHz, pol. H, SR: 27500, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS: 1, 2 (Mediaset)
- 11,432 GHz, pol. V, SR: 27500, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS: 1, 2 (Mediaset)
- 12,539 GHz, pol. H, SR: 27500, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS: 1, 2 (Mediaset, copy of 11,334 GHz, pol. H)
5°W
- 11,012 GHz, pol. V, SR: 30000, FEC: 3/5 (DVB-S2/8PSK), PLS Mode: Root + 16416, MIS 2, 3, 11 (RAI)
- 11,179 GHz, pol. V, SR: 30000, FEC: 3/5 (DVB-S2/8PSK), PLS Mode: Root + 16416, MIS 4, 5, 12 (RAI)
- 11,637 GHz, pol. V, SR: 30000, FEC: 3/5 (DVB-S2/8PSK), PLS Mode: Root + 16416, MIS 1-6 (RAI)
- 11,675 GHz, pol. H, SR: 30000, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 16416, MIS 7-16 (RAI)
- 12,585 GHz, pol. H, SR: 27500, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS 1 (data transmission, OpenMux IP Gateway)
- 12,606 GHz, pol. V, SR: 29900, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS 1, 2 (Mediaset)
- 12,669 GHz, pol. H, SR: 29900, FEC: 2/3 (DVB-S2/8PSK), PLS Mode: Root + 8, MIS 1 (data transmission)
There are still two transmissions at 5°W, which can be PLS or not (frequencies: 11,137 GHz, pol. V and 11,511 GHz, pol. H), still under investigation, probably french channels.
How to receive?
As there is at the moment none DVB app with PLS selection support there, so first You need to run CrazyScan and select correct PLS mode in IQScan window, then close CrazyScan and run selected DVB app (DVB app need to have ability to select MIS, as all transmissions are multistream). Be aware that if You select PLS mode - You will be unable to receive any other DVB-S2 transmission until You get back to Root+1 in CrazyScan!
Watching is not very comfortable, because no DVB app can select PLS mode, so this is rather tip for DX-ers, not for everyday watching.
If You will see any transmissions similar to Mediaset/RAI - there is possibility to run PLS autodetection in CrazyScan, but it need some time to find correct combination. Select PLS mode with value "0" and wait...