Moderator Control Panel ]

6925 with TSREADER??

Re: 6925 with TSREADER??

Postby wejones » Tue Jul 26, 2011 10:58 pm

I am also using XP Pro 32 bit. So it's starting to look like the TSREADER soruce dll only works with the Window 7 64 bit.

I'd be curious to see a screenshot of the tuning window from those who have it working in W7. Ie are there any advanced tuner options, like to choose DVB-S2 instead of DVB, and or the various FEC values, or does it just automatically find the appropriate parameters or something. I'm new to using BDA sources with TSREADER, so I'm not sure if they show different controls in the tuning window. For example:

Image

You can see that TSREADER recognizes the card, but is not in advanced mode. Besides the fact that you can't select DVB-S2, etc, this is important, because any DVB-S2 or other "advanced" transponders do not even show up in the transponder list. Only DVB transponders show up.

Below, I have clicked on the first transponder, which locks using CrazyScan, and works with other PC receiver cards with TSREADER, but you see that the TSREADER window comes up completely empty. At first, it says "reading PAT" down at bottom left, but then that goes away. It says that there is no lock, however it must have a lock of some kind, because it never comes back saying that it couldn't lock. It just sits there doing nothing.
In my case, however, it is not registering any signal level. Ie if I go into CHART-SIGNAL, the signal level just sits on zero.

Image


Anyway, I hope that screenshots help, but it really seems to be something to do with XP-32 vs W7-64 .
wejones
 
Posts: 7
Joined: Sat Jul 23, 2011 1:32 am

Re: 6925 with TSREADER??

Postby Alx » Tue Jul 26, 2011 11:16 pm

Are you sure, your TP is really DVB (S or S2) ? may be that is Digicipher-2, DSS or something ?

For the normal DVB under WinXP I do not experience reception problems, just the lack
of Advanced Mode setting Menu..
Alx
 
Posts: 8
Joined: Tue Jul 26, 2011 9:05 pm

Re: 6925 with TSREADER??

Postby sotos65 » Tue Jul 26, 2011 11:28 pm

I can't see any advanced settings either here. I only had to type the transponder main parameters (frequency, sr) in the box (since I do not have an updated transponders list in the TSReader), and it just locked to it. There was no need to set any DVB-S/DVB-S2 parameters for this one (11362,H,22000 DVB-S2/8PSK, on Astra 19.2E).

Clipboard01.jpg


Clipboard03.jpg
sotos65
 
Posts: 55
Joined: Thu Jul 07, 2011 5:23 pm

Re: 6925 with TSREADER??

Postby wejones » Wed Jul 27, 2011 2:13 am

Are you sure, your TP is really DVB (S or S2) ? may be that is Digicipher-2, DSS or something ?

For the normal DVB under WinXP I do not experience reception problems, just the lack
of Advanced Mode setting Menu..


Yes, positive. Transponder is DVB. I've tried a dozen different transponders that Crazyscan, and other cards lock well.
I can't imagine what might be different about your setup.

I think you mentioned a version number for the .dll. How do you find that version number? The file listed in an earlier message in this thread is the same file I downloaded when I got my card about 11 days ago, dated something like June 20 I think. But I didn't see any version number on the file.
wejones
 
Posts: 7
Joined: Sat Jul 23, 2011 1:32 am

Re: 6925 with TSREADER??

Postby Alx » Wed Jul 27, 2011 3:01 am

I have just the same DLL as yours, from this Forum topic (provided by steven).
Alx
 
Posts: 8
Joined: Tue Jul 26, 2011 9:05 pm

Re: 6925 with TSREADER??

Postby baber » Sun Jul 31, 2011 5:20 pm

Hi. in tbs8920 and other models of dvbcard when i used tsreader and when stopped it from file menue (not close Tsreader) and open tbs ip data . tbs ip data had signal but in tbs6925 when i use tsreader and when stopped it then open tbs ip data it don't have any signal and my signal lost and have to restart my pc

what do i have to do?
baber
 
Posts: 33
Joined: Thu Jul 07, 2011 7:36 pm

Re: 6925 with TSREADER??

Postby steven » Sun Jul 31, 2011 6:19 pm

baber Wrote:Hi. in tbs8920 and other models of dvbcard when i used tsreader and when stopped it from file menue (not close Tsreader) and open tbs ip data . tbs ip data had signal but in tbs6925 when i use tsreader and when stopped it then open tbs ip data it don't have any signal and my signal lost and have to restart my pc

what do i have to do?

Hi baber
we will have a test later,and will give you an answer as soon as possible.
Thanks
steven
 
Posts: 2239
Joined: Fri Aug 06, 2010 3:23 pm

Re: 6925 with TSREADER??

Postby starman345 » Sun Jul 31, 2011 8:49 pm

Alx Wrote:Are you sure, your TP is really DVB (S or S2) ? may be that is Digicipher-2, DSS or something ?

For the normal DVB under WinXP I do not experience reception problems, just the lack
of Advanced Mode setting Menu..


You are using TSREADER Professional? I think the rest of us are using the regular version, I wonder if that might make a difference?
10' dish- Bullseye II c/ku
55.5W to 139W
Windows 8.1 64 bit
TBS 8922 Prof 7301 TBS 6925
starman345
 
Posts: 67
Joined: Wed Jan 19, 2011 6:52 am

Re: 6925 with TSREADER??

Postby Alx » Mon Aug 01, 2011 2:47 am

hi starman345,
yes, I have TSReader Professional version, but as you can see above satos65 has the Standard one,
and lock -S2 tp successfully as well. Should not be any difference related to your issue...
Alx
Alx
 
Posts: 8
Joined: Tue Jul 26, 2011 9:05 pm

Re: 6925 with TSREADER??

Postby baber » Mon Aug 01, 2011 3:35 am

Hi. my dvbcard is Tbs6925 and i use tsreader 2.7.44 does this version of tsreader work on aps/ 16aps/ or 32 aps frequncy?

because i have signal in tbs ip data but tsreader has no signal
baber
 
Posts: 33
Joined: Thu Jul 07, 2011 7:36 pm

PreviousNext

Return to Windows

Who is online

Users browsing this forum: No registered users and 4 guests