Page 1 of 7

6925 with TSREADER??

PostPosted: Mon Jul 25, 2011 4:50 am
by wejones
I downloaded the TSREADER source dll file from the web page. When I put it in TSREADER, TSREADER recognizes the card, however it doesn't seem to work. It doesn't come up with the normal advanced tuner menus allowing you to specify DVB-S2, or the other advanced modes. Also, even if I try to lock a regular DVB-S transponder, nothing seems to happen.
The advertising says that it works with TSREADER, and the source file came from the TBS web page, so it seems like it should work, but it doesn't.
I can get to TSREADER through CrazyScan, which is nice when searching for signals, but I'd really like to do it directly also, since TSREADER is what I use for 95% of my viewing. Any ideas?

Thanks

Re: 6925 with TSREADER??

PostPosted: Mon Jul 25, 2011 5:52 am
by starman345
I"m finding the same situation with my TBS 6925 card. The card is recognized, it acts like its tuning a signal, but nothing shows up in the analyzer window...no data. It would be nice to be able to use this great card directly with TSREADER for analyzing all the different signals it finds.

Re: 6925 with TSREADER??

PostPosted: Mon Jul 25, 2011 8:31 pm
by Magwitch
Same for me. TSReader recognises the card in the bottom corner, but says 'no signal'.

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 5:07 am
by DVB
Hmmm...

I see data after tuning for TP with BDASuorce_TBS6925.dll (W7 x64)

You mean that You've got completely no data in window? No Active PID's, Video Decode etc.?

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 5:34 am
by starman345
DVB Wrote:Hmmm...

I see data after tuning for TP with BDASuorce_TBS6925.dll (W7 x64)

You mean that You've got completely no data in window? No Active PID's, Video Decode etc.?


Thats right, I see signal but no data, empty panes. I take it you are using windows 7. Windows XP 32 bit here, maybe that is a clue

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 9:44 am
by steven
Hi starman345
i have updated the tbs6925's tsreader
http://hotfile.com/dl/125017901/2f712c1 ... 5.rar.html
please try this.
thanks

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 9:48 am
by steven
starman345 Wrote:
DVB Wrote:Hmmm...

I see data after tuning for TP with BDASuorce_TBS6925.dll (W7 x64)

You mean that You've got completely no data in window? No Active PID's, Video Decode etc.?


Thats right, I see signal but no data, empty panes. I take it you are using windows 7. Windows XP 32 bit here, maybe that is a clue

Hi starman
about the DSS,would you mind give me more information.
The driver scan mode is auto scan.
thanks

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 5:44 pm
by starman345
steven Wrote:Hi starman345
i have updated the tbs6925's tsreader
http://hotfile.com/dl/125017901/2f712c1 ... 5.rar.html
please try this.
thanks


Hi Steven, thanks for the new source but the situation is the same for me, TSREADER shows no information at all. I sent PM about the DSS information

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 8:15 pm
by sotos65
In windows 7 64bit it works fine,

10743h.jpg

Re: 6925 with TSREADER??

PostPosted: Tue Jul 26, 2011 9:48 pm
by Alx
Hello,
I was able to lock successfully DVB-S/-S2 transponders on my TSReader 2.8.47, based on WinXP x32 environment,
driver v1.0.1.4, TSReader source module v1.0.7.0. I confirm, I could not find any advanced tuner menus allowing
to specify DVB-S2, or the other advanced modes (16/32APSK, ACM, StreamID...), anyway for DVB-S/-S2 TP's with
standard QPSK/8PSK I did not experience any problems...
Some pics are attached (I tested TP at Astra 1G at 31.5°E).

Is it possible to add some advanced functionality DVB-S2 mode parameters to TSReader TBS6925 Source Module Menu
(at least, for normal DVB Transport Stream transmissions) ??