TBSDTV Community Forum

Just to update my situation.
I am still unable to get the 6925 source to work directly with TSREADER.
Another reader suggested that I use the -1 switch in TSREADER to force it into uniprocessor mode, since I'm running on a multi-core computer, however that didn't help.
Also, thinking that possibly it might help to have another program initiate the tuning process, I tried to run Crazyscan first, and tune a transponder, then go to TSREADER and try to see if it will analyze the same transponder, but TSREADER gives an error suggesting that it is detecting that Crazyscan has control of the card. Also, if I try to run Crazyscan after I have already started TSREADER on a transponder, Crazyscan won't start, giving the error that it gives when multiple instances of the program are running, suggesting that TSREADER does in fact have control of the card, but is not detecting a lock or any data stream.

I have submitted a support request at the TSREADER site asking for suggestions as to why TSREADER works for the 2 people, one running Windows 7, and the other running TSREADER PRO, but not for people running Windows XP Pro with the regular version of TSREADER. If I get a response with any suggestions, I will report them here.

But I would really appreciate it if someone at TBS could try running the regular version of TSREADER with XP PRO, and see if they can duplicate the problem and perhaps come out with a working version of the source.
THanks.

I too am in the same situation, can't use the TBS TSREADER source file with my WinXP Pro 32 bit setup.. I read others have had the same problem when using WinXP Pro 32 bit, but after installing Widnows 7 64 bit, those issues went away.
Can someone look into this problem?

..like most of the software tools provided by TBS the source file TBS6925.dll is buggy. I can only tune to low band channels because 22KHz is missing

Derrick Wrote:..like most of the software tools provided by TBS the source file TBS6925.dll is buggy. I can only tune to low band channels because 22KHz is missing

Yeap, same here. The TSReader_BDASource_TBS6925.dll source file doesn't seem to support command line parameters either, so it's impossible to launch TSReader from a command prompt with all tuning parameters (frequency, polarization, sr, etc).

Any ideas, who develop TBS6925 source module for TS Reader - TBS company or TS Reader developer or ... ?
It could be provided by TBS people but developed by some another party ?

Hi Derrick
22k is auto opened or closed by the driver,you do not need to set in TSReader.
Thanks

I don't set 22khz manually. I use the input setup of tsreader for a universal LNB. With TBS 8921 high band channels are tuned after the 2nd attempt (bug reported long time). With TBS 6925 high band channels are never tuned cos the 22KHz signal is never switched on!!!

Hi Derrick

Would you mind give us more information,which transponder you are scan,now i have know your LNB's setting ,I will use your setting to have a test.
i can use this to lock with high LNB.

Thanks

steven Wrote:Hi Derrick

Would you mind give us more information,which transponder you are scan...

..as I told you all high band transponder fail cos there is no 22KHz tone signal. I've checked this with a scope.

OS is XP professional

Hi Derrick

But after my test ,12538 41250 V
LNB is 9750 10600
it is high band
12538-10600 = 1938,
I can use this lock successfull.

So 22k is no problem,i just do not know why you can't?