Hi ! i just replaced my Hauppauge HVR 5500 with the TBS 6925 and i was disappointed because diseqc isn't working at all with this card.
I'm using a diseqc 1.1 cascade with 22 LNB's. (High Quality SPAUN SUR420F & SAR411F uncommited switch 1-6 (Port 1-4) ).
This setup worked perfectly with my hauppauge dvb card with DVB Viewer Pro. this card is connected via Loopthrough to another sattellite receiver (there also works the diseqc 1.1 uncomitted switch - so there cant be a configuration problem with my diseqc equipment) the TBS 6925 does not send diseqc 1.1 uncommitted commands.
i tested the 6925 with DVB Dream ( included with the CD) and my already and previously working DVB Viewer Pro. also crazyscan wasn't able to send right diseqc 1.1 uncommited command. all of them not working with that card.
if i set my sat receiver to the right diseqc port and then switch off im able to scan the satellite with the 6925.
i think this is a driver problem.
i installed the latest driver from your download page.
im using windows 7 64 bit.
Please tell me how to get the tbs 6925 working with disecq 1.1
Thanks