TBSDTV Community Forum

In theory you may be right. But I don't see any tv-application that will allow to set PLS or MIS.

There is none at this moment - next step (after there will be SDK available to know how to turn PLS/MIS on) will be on developers side, to add support for PLS/MIS in their DVB players With drivers support that should be much easier now

Now the only one app that I know that can select PLS and MIS is AltDVB with device interface from crazycat. ProgDVB can select MIS, but I don't know can it also select PLS code. All other DVB players are not able to do that, so watching only by CrazyScan + VLC or EBS + VLC? It would be nice to be able to watch these channels in other DVB players as well.

+ MIS+PLS support for Linux and Enigma2PC (OpenPli+XineLib port from nobody9).
patches for TBS Linux drivers
patche for Enigma2PC

Changes for Enigma2PC

• ISI selection in manual scan menu
• satellites.xml format extended (new tags - is_id, pls_mode, pls_code) and new modulation values (3 - 16APSK, 4 - 32APSK)

Work well on TBS 5980, 5925/6925, 6926.

Some screeshoots from Mediaset @13E

Hi DVB

Please have a try with this new version of driver and TBSRecoder:
https://hotfile.com/dl/197936327/c01fcb ... 1.zip.html
https://hotfile.com/dl/197936380/24dd58 ... er(3.0.0.7)-20130312.zip.html

Which can set the Root and Gold code.

Kind Regards

steven

I can confirm - working for me with Root on Hot Bird 13°E (only need to select MIS after lock, because if I won't choose MIS - signal is locking and unlocking)

Screenshot: http://tinypic.com/r/wu3qyd/6

Bugs:
1) After closing TBSRecorder looks like PLS Code is not cleared and thus none DVB-S2 frequency work in other software (can reset this by CrazyScan as temp solution). PLS should be set to Root+"1" on exit - it's default value for DVB-S2, not "0".
2) TBS Recorder default LNB settings are weird (low and high: 11300, lnb switch 20000)
3) Message when setting code is now "Successful set the GoldCode", even when in fact RootCode was set - could be changed to something like: "Successfully set the PLSCode".

Combo is still missing, but AFAIK there are no such transmissions at this moment, so no ability to test Combo practically (or maybe somebody know such transmission?)

Thanks Great addition

Hi DVB

Thank you very much for your test report.for the bugs,Please have a try with this new version:
https://hotfile.com/dl/198185885/61ac02 ... er(3.0.0.7)-20130314.zip.html

When close TBSrecoder ,it will set the default value to driver ,Gold is 0 and root is 1.

Please have a try.

Kind Regards

steven

Something went wrong - cannot donwload - message says that file had been deleted...

EDIT: Link fixed - thanks, I'll test it later.

Ciao!
I scanned successfully some frequency/transponder with software" TBS TSrecorder" but once I get the lock I dont know how and with witch player I can see the live streaming of the channel I scanned. Help me .... what is procedure to get the live streaming? Thanks.

Tested new TBSRecorder

1) Fixed
2) In LNB Settings LNB High is 110600, should be: 11600 (additional "0")
3) Fixed

Thanks

@enzogara - TBS Recorder can only record TS, not stream it - wrong app.

Hi DVB

Thank you very much for your test report.
Because we just use Ku-C band,this version just a test version.

Ok,we will release this new version soon. and we will make a interface to let DVB soft to use
such as DVBViewer ,DVBDream,ProgDVB....

Thanks again for your help.

steven