TBSDTV Community Forum

Hi all
Here is the TBS8921 win7 64bit driver which have not IR,because we think it maybe the IR cause the BSOD.
So all would you mind try this to have a test.and send your test report.
here is the driver:
http://hotfile.com/dl/121851650/fafab48 ... r.rar.html
Thanks

Hi Steven!

Do You have TBS8921 win7 32bit driver which have not IR,because i am getting BSOD´s on Win 7 32bi aswell......

Best Regards

/Anders

AndersM Wrote:Hi Steven!

Do You have TBS8921 win7 32bit driver which have not IR,because i am getting BSOD´s on Win 7 32bi aswell......

Best Regards

/Anders

Hi
Would mind which player you are use when got BSOD, MCE, TBSView and so on ..?
and later i will give you a 32bit version.
Thanks

Hi
Would mind try this version which have not BlindScan.
http://hotfile.com/dl/122329714/a682382 ... S.rar.html

Waiting for your test report.

Thanks

What about 32bit win7?????

Hi Steven, I've also been experiencing several BSODs with Win 7 32bit while using W7MC + TV Source. I took a look at the reports and in all of them the Bug Check String is "BAD_POOL_CALLER" and among the drivers found in the stack I always see tbs8921.sys (the others being halmacpi.dll, ks.sys, ntkrnkpa.exe, by Microsoft). Will you be able to provide an updated driver? Thanks.

riccume Wrote:Hi Steven, I've also been experiencing several BSODs with Win 7 32bit while using W7MC + TV Source. I took a look at the reports and in all of them the Bug Check String is "BAD_POOL_CALLER" and among the drivers found in the stack I always see tbs8921.sys (the others being halmacpi.dll, ks.sys, ntkrnkpa.exe, by Microsoft). Will you be able to provide an updated driver? Thanks.

hi do you have used the latest driver on downloader page:
http://www.tbsdtv.com/download/8921/TBS ... .0.0.7.rar
thanks

steven Wrote:hi do you have used the latest driver on downloader page:
http://www.tbsdtv.com/download/8921/TBS ... .0.0.7.rar
thanks

That's exactly what I did. I also installed the new blind scan tool 3.0.0.5. No BSOD anymore but things turned from bad to worse.

The performance with low SR transponders is much worse than before (I still use the debug driver 8921dbg). Many active transponders are missing. According to the specs the card should be able to handle symbols rates >1MS/s. But this is not true. A different card shows no problems:

About blind scan... Though no BSOD occurred the yield of all scans is nada! Besides after changing diseqc the card went to sleep. Only after deactivating/activating the card in the device manager the TBS8921 went back to work.

What a progress since I posted about poor performance in January of this year

Derrick Wrote:About blind scan... Though no BSOD occurred the yield of all scans is nada! Besides after changing diseqc the card went to sleep. Only after deactivating/activating the card in the device manager the TBS8921 went back to work.

What a progress since I posted about poor performance in January of this year

Hi
This driver can solve the diseqc problem,
http://hotfile.com/dl/124703782/73664c1 ... e.rar.html
thanks