TBSDTV Community Forum

Posted: **Sat Dec 13, 2014 8:01 pm**

Hi!
I just installed the latest driver (v1.0.3.1) for QBOX CI TBS5980, and I get blue screen every time I run a EPG update using EPG Collector (http://sourceforge.net/projects/epgcollector/) .
Reverting to driver 1.0.2.8 fixes the problem.

Here's the minidump: https://www.dropbox.com/s/6sitookj1l3ak12/121314-16052-01.dmp?dl=0.

I hope this helps.

ccristal

Posted: **Mon Jan 12, 2015 7:44 pm**

Just to confirm, I also have a Windows 7 (x64) system with 2x TBS5980, and when I upgraded from the v1.0.3.0 driver to v1.0.3.1 I also suffered BSODs as soon as the TBS5980 was asked to tune (using MediaPortal). I then went back to the v1.0.3.0 driver and all is fine. What's the changelog associated with the v1.0.3.1 driver? Happy to work with TBS to get this resolved if required.

Posted: **Tue Jan 13, 2015 9:45 am**

Hi all

we are on checking this problem now and will fix this issue soon.

Thanks

Kind Regards

steven

Posted: **Tue Jan 13, 2015 11:27 am**

hi all,
sorry for trouble, we have updated a new version driver V1.0.3.2, please download it from our website and have a test.
thanks a lot

Posted: **Fri Jan 16, 2015 9:29 pm**

Thanks luchy, I've just installed the updated 1.0.3.2 driver. During the installation I received a "Windows Security" error, see attached. I clicked "Install this driver software anyway" to continue with the driver installation. As a test, I tried a couple of channels and all seems fine. I will be in touch if I experience any issues.

Posted: **Mon Jan 19, 2015 9:06 pm**

OK, the v1.0.3.2 driver doesn't crash, but... with that version I do have a problem with the CI module in the sense that it doesn't seem to descramble with the v1.0.3.2 driver. It works fine with the v1.0.3.0 driver, so I've gone back to that one again. As stated in my earlier post, I use MediaPortal, version 1.10.0 with the required TBS patch.

With the v1.0.3.0 driver I see this:

[2015-01-17 09:08:11,828] [Log ] [21 ] [DEBUG] - Turbosight: send PMT to CAM, list action = Only, command = Descrambling
[2015-01-17 09:08:11,828] [Log ] [21 ] [DEBUG] - Turbosight: is CAM ready
[2015-01-17 09:08:11,842] [Log ] [21 ] [DEBUG] - Turbosight: result = True
....
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - card: StartTimeShifting 5 T:\Timeshift\live5-0.ts
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - card: CAM enabled : True
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0 SetTimeShiftFileName:T:\Timeshift\live5-0.ts
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - Set video / audio observer
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
[2015-01-17 09:08:12,475] [Log ] [21 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
[2015-01-17 09:08:12,658] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,658] [Log ] [26 ] [INFO ] - audioVideoEventHandler Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,700] [Log ] [26 ] [INFO ] - PID seen - type = Video
[2015-01-17 09:08:12,700] [Log ] [26 ] [INFO ] - audioVideoEventHandler Video
[2015-01-17 09:08:12,700] [Log ] [21 ] [INFO ] - card: WaitForFile - video and audio are seen after 0.2249504 seconds

With the v1.0.3.2 driver I see this:

[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: send PMT to CAM, list action = Only, command = Descrambling
[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: is CAM ready
[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: result = True
...
[2015-01-17 08:58:44,030] [Log ] [16 ] [INFO ] - card: StartTimeShifting 5 T:\Timeshift\live5-0.ts
[2015-01-17 08:58:44,030] [Log ] [16 ] [INFO ] - card: CAM enabled : True
[2015-01-17 08:58:44,046] [Log ] [16 ] [INFO ] - subch:0 SetTimeShiftFileName:T:\Timeshift\live5-0.ts
[2015-01-17 08:58:44,046] [Log ] [16 ] [INFO ] - Set video / audio observer
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card: WaitForFile - no audio was found after 15.0070076 seconds
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card: WaitForFile - audio and video stream is scrambled
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card TBS 5980 CI Tuner: StopTimeShifting user:KOROS sub:0

Posted: **Fri Jan 23, 2015 6:32 pm**

FYI, TBS have now released v1.0.3.3 and all is well again

.

Posted: **Wed Feb 11, 2015 5:52 am**

Hi!
Any chance of having a buikd of 1.0.3.3 with the IR port disabled?
Thank you!

ccristal

Posted: **Fri Dec 25, 2015 9:26 pm**

Bu ürünü 30 Nisan 2015' tarihinde sitenizden satın aldım. İşlerimin yoğunluğundan ötürü ürünü, yeni kullanmaya başladım. DVB Dream2.7.4 & DVBViewer pro 5.3.2 Windows 7 SP1 64 bit desktop sistemim de ve Windows 8.1 64 bit laptop sistemim de TBS5980 kart kullanırken bir süre sonra mavi ekran (Bluescreen) hatası veriyor. Ürün ile ilgili çıkmış olan eski ve en güncel donanım sürücülerini denedim, aynı şikyetim devam ediyor. Ürünü bu şekilde kullanmak mümkün değil malesef.

Çözüm önerilerinizi bekliyorum teşekkürler.

Google Translate:
This product April 30, 2015 Google bought your site. Due to the intensity of my work product, I began to use the new. DVB Dream2.7.4 & DVBViewer Pro 5.3.2 Windows 7 SP1 64-bit desktop systems and Windows 8.1 64-bit laptop system I'm also using a blue screen after a while TBS5980 card (Bluescreen) gives an error. I tried the old and the latest hardware drivers that came on the product, but I şikyet continues. Product is unfortunately not possible to use in this way.

Solution Waiting for your suggestions, thank you.

Posted: **Sat Dec 26, 2015 5:59 am**

Edirne Türkiye'den selamlar. Mavi ekran sorunu için kimse cevap vermiyormu?

Greetings from Turkey Edirne. No one replied to a blue screen problem?

TBSDTV Community Forum

Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7

Re: Bluescreen with TBS5980 driver 1.0.3.1 on Win7