Moderator Control Panel ]

Sudden (death)

Sudden (death)

Postby Rasmus » Tue Feb 26, 2013 1:03 am

Hello Forum.

We have had tbs 6984 running for about a year and a couple of month now and suddenly specific channels on the same multiplex is now "dead"

when tuning to the channel we get an output from sasc-ng saying:

Feb 25 17:53:40.634 CAM(core.ecm): 0.1: triggered SID 1160/-1 idx 1/1 mode 3/0 sync
Feb 25 17:53:40.634 CAM(core.ecm): 0.1: new caDescr: <empty>
Feb 25 17:53:40.635 CAM(core.au): 0: stopping chain 093e
Feb 25 17:53:40.635 CAM(core.au): 0: chain caid 090f -> none available
Feb 25 17:53:40.635 CAM(core.au): 0: chain caid 093e -> Cardclient(-15) [00c1-82/ff]
Feb 25 17:53:40.635 CAM(core.au): 0: starting chain 093e
Feb 25 17:53:40.635 CAM(core.au): 0: stopping chain 093e
Feb 25 17:53:40.635 CSA: Got command(4): I idx: 0 pid: 0
Feb 25 17:53:40.635 CSA: Got command(4): I idx: 0 pid: 0
Feb 25 17:53:44.056 CAM(core.auStats): EMM packet load average (1/4/10min) 54 13 5 pks/s

the channel is subscribed and just testet with original hardware of subscriber card.

in my view it looks nearly the same as if you stop the recording.

have anybody had similar issue? cant seem to figure out if the problems is with sasc or the drivers.

the channels that is not seen is on frequency 12.476 vertical

>>>> system info:
ubuntu 10.04 with latest updates running kernel 2.6.32-37 with tbs drivers November 2011.
it has been running great since we installed it but all of a sudden this issue becomes very anoying.

Thanks in advance
Rasmus
 
Posts: 5
Joined: Sat Dec 17, 2011 7:03 pm

Re: Sudden (death)

Postby Rasmus » Tue Feb 26, 2013 4:12 pm

Okay just tried everything from scratch.

kernel 2.6.32-45
newest driver from download site + mutex patch
newest sasc from trunk.
still the same issue.
Rasmus
 
Posts: 5
Joined: Sat Dec 17, 2011 7:03 pm


Return to Linux

Who is online

Users browsing this forum: No registered users and 2 guests

cron