TBSDTV Community Forum

Hi

Recently I have purchased TBS S5922SE DVB-S2 USB tuner from www.buydvb.net.

The tuner is working fine with single Ku-band LNB and DVB Dream on my Windows 10 64-bit OS PC.
But recently I have added another Ku-band LNB with a Diseqc 2.0 4x1 switch.
LNB1 attached to Port-1 and LNB2 is attached to Port-2.

Now in DVB Dream (v 2.7.4) only LNB1 is working and LNB2 is not working.
Means DVB Dream shows the signal and also locks it too, but shows no channels found !!!!
Also if I have scanned the channels earlier, it does not play/render the channel of LNB2.

Please help, seems like I have bought a faulty/sub-standard tuner from TBS

This thread didn't get any answer till now. I am also facing the issue in dvb dream. Earlier I reported the exact issue in 5990 but it was working in dvb dream. But in case of 5922 SE, it is not working in dvb dream itself.

The thread link for 5990 is below.

http://dreamdth.com/showthread.php?tid=146002

It is happening with same ports only.

Note: 5922 SE driver version is 1.0.0.5. 5990 driver version is 1.0.0.6. Will 5922SE work with 1.0.0.6 of 5990?

check 5922 entry DVBDream\Devices\bda_extensions\conf.ini

some like this

Code: Select All Code

TBS 5922 USB DVB-S2 Tuner=tbs.ext

crazycat Wrote:check 5922 entry DVBDream\Devices\bda_extensions\conf.ini

some like this

Code: Select All Code

TBS 5922 USB DVB-S2 Tuner=tbs.ext

Yes, it is there as below..

TBS 5922 USB DVB-S2 Tuner=tbs.ext

,,

check logs
DVBDream\Logs\bda.log
DVBDream\Logs\bdaext.log

P.S. This actual for modern DVBDream's with internal BDA module and ext-submodules. Maybe 2.4+. Anyway you can try streamreader module in DD 3.0+ or alternative BDA module (compatible with DD 1.5e+)

P.P.S. and check latest DvbDream TBS-OEM from downloads