TBSDTV Community Forum

Probably 99 percent of users will be totally confused that the frequency range is not the published satellite transponder frequencies.

There should also be a setting for the 22KHz tone that will automatically follow/adjust-to the frequency band.

seems sttrange they are doing the same thing with the 5925 as with the 8921 months ago...Read here:
viewtopic.php?f=27&t=191

Hi User5925

About the Blindscan input frequency range is not the published satellite transponder frequencies.
We are updating this now,and new version will be released soon.

Thanks

Indication tuning is nonlinear. 10% pre-tuning = 95% indication . It would be an indication of the current scanning frequency. Thanks

Hi steven,
A new version ( 3.0.0.9) has no change in the entering of frequencies

Hi Peon

This new version added all scan for L/H band.
Next week, I will give you a beta version which can enter frequence. : )

Thanks

Hi Peon

Here is the new version which have used the satellite frequence .
Hers is the linker:
http://hotfile.com/dl/147624251/ec25c21/tbs-blindscan_v3.0.1.0.zip.html

Would you mind using this new version to have a test.if have any problem, just contact me.

Best regards

Hi Steven
Thank you. But it works only in the Ku band. The C band is not. Can not scan. Not accept the entry of any frequency. Please fix.
Thanks
Best Regards

Hi Peon

Thanks for your test report.
And here is the new version.
Would you mind having a test again.
Here is the file linker:
http://hotfile.com/dl/147984471/3484fcd/tbs-blindscan_v3.0.1.0.zip.html
Thanks

Best regards

With the new test version, and my TBS 8922 ku band blind scanning works fine, on C band, all transponders are scanned correctly if I select pol:v or pol:h, however if I select pol:ALL then only v is scanned, then the program quickly reports total number of found transponders, it seems h is not scanned when pol:ALL is selected.