Update list for supported CAMs

[warumnix]

Hello,

earlier we've posted a list of CAMs that are supporteb by some of our CI products http://www.tbsdtv.com/forum/viewtopic.php?f=33&t=1420

here is an update:

01. Diablo CAM (it's the latest revision 2.3 that was produced, but we
confirmed older revisions like 2.1 work fine too)

02. Technisat TechniCrypt CX Conax CAM (while we tested only the Conax
module, what's expected as common sense is that all other module from
their "CX" series like Irdeto, etc are working, because they use the
same hardware)

03. SMiT Conax CAM (standard CAM, not the professional version)

04. nCAM HD CAM for one Polish PayTV

05. the official "Canal Digitaal" CAM (it's Mediaguard CAM made by
SmarDTV and here it's good to mention that many re-branded CAMs are
made by SmarDTV, we tested also other such CAMs made by SmarDTV not
included in the picture, but i will mention them later)

06. Easy.TV CAM made by Mascom: it's actually Cryptowork and Irdeto CAM

07. the official "Posat" CAM - it's Nagravision

08. SMiT Crytoworks CAM (not the professional version)

09. AlphaCrypt

10. the official Viaccess CAM

11. Aston Mediaguard CAM (it's version 2.6)

12. SMiT Irdeto CI+ CAM (of course, it works in CI backward compatibility mode)

13. Conax NP4 Pocket CAM made by Neotion

additionally not on the picture after the developed was finished i tested:

14. SMiT Conax Professional CAM

15. SMiT Irdeto Professional CAM

16. SMiT Irdeto CAM (standard CAM, not the professional version)

17. SMiT Viaccess CAM (standard CAM, not the professional version)

18. Irdeto CI+ CAM made by Neotion (of course, it works in CI backward
compatibility mode and it was re-branded for SkyLink service on Astra
23.2E - fully working, because actually SkyLink don't use CI+ and use
it as pure Irdeto CAM)

19. PowerCAM Pro

20. the official "NDS" CAM - it's made by SmarDTV

21. the official "Astra HD+" CAM - it's made by SmarDTV and while it's
working, it's not really usable, because it doesn't have CI-backward
compatibility mode and the only thing you can do with it is to access
the MMI menus

22. UniCAM series of CAM - usable for long list of services,
especially CI+: http://unicam2.to/compare.php