TBSDTV Community Forum

great, please, test with DVBLast again after you solved the en50221 error and i also send you email to arrange remote access in case the problem persist.

Today I tested different encrypted channels in DVBLast - all works perfectly.
Thank you for qualified help!

Hi garry

Would you mind sharing your solution on how to remove the en50221 error,because
one of our other user have met this problem too.

Kind Regards

steven

Hi,

It was my error, not a error in TBS drivers. Due to my experiments 3 files were changed:
/usr/include/linux/dvb/dmx.h
and 2 files in linux-tbs-drivers-source:
/linux/include/linux/dvb/dmx.h
/linux/drivers/media/dvb/dvb-core/demux.h

So the only thing that I have done - returned all back and recompiled drivers. So if you didn't change these files all must work.

Hi garry

Thank you very much for your reply,and the information,
Maybe that user as you said that it is other problem,we will have more
check with this.

Thanks again for your help. : )

Kind Regards

steven

Hello all!

I have exactly the same problem with my TBS6991.

I have system with six card TBS6991SE, logic cards from adapter0 to adapter10 receive scrambled signal and works well.
But adapter11 can`t receive signal with inserted CAM.

The same error in dvblast
error: en50221: cannot read from CAM device (-1:Resource temporarily unavailable)

and
warning: no DVR output, resetting

First time, until dvblast call CAM signal is receives and streaming out to my network, but after first request to cam something strange happens
Recieve signal from sattelite is stop, Stream out is stopped.

I try to update dvblast to dvblast 3.0 - no success.
I try to update drivers to last version 20150728 - no success
I turn on debug message for cam. See dvblast, cam debug output in attach.

No any changes in header or other files...

What`s problem?
How I can solve it?