Moderator Control Panel ]

MUMUDVB CAM ISSUE

MUMUDVB CAM ISSUE

Postby achilless » Fri Jul 24, 2015 12:20 am

I've got some problem with mumudvb cam
I'm watching on my recivier all channels are working without problem.
But when i try on mumudvb it says " Channel "beIN SPORTS 1 HD" is now highly scrambled (100% of scrambled packets). Card 0 "
How can i fix thath problem.

HERE IS MUMUDVB CONFIG

Code: Select All Code
#------------ TUNING -------------
card=0
freq=11096
pol=h
srate=29900
#
coderate=2/3
lnb_type=universal
modulation=8PSK
#
lnb_lof_low=9750
lnb_lof_high=10600
lnb_slof=11700
#

autoconfiguration=full
autoconf_radios=1
autoconf_sid_list=410 411
#autoconf_unicast_start_port=4250



#--------- NETWORKING --------------
#common_port=1234
#
# multicast_ttl=2
#

#Do we want to send the announces ?
#sap=1
#
#sap_interval=1

# ---------- PAT REWRITING ----------
#rewrite_pat=1
#rewrite_sdt=1
#sort_eit=1
#unicast=1
#port_http=4242
#ip_http=88.255.248.169
#unicast_max_clients=2
#scam_support=1
#ring_buffer_default_size=16384
#decsa_default_delay=500000
#send_default_delay=1500000


# ---------- SCRAMBLED CHANNELS ----------
cam_support=1
autoconf_scrambled=1

#cam_number=0


HERE IS MUMUDVB CONFIG DEBUG

Code: Select All Code
WARN:  CAM:  You have enabled the support for conditionnal acces modules (scrambled channels). Please report any bug/comment
Info:  Main:  Full autoconfiguration, we activate SAP announces. if you want to deactivate them see the README.
Info:  Main:  Full autoconfiguration, we activate PAT rewriting. if you want to disable it see the README.
Info:  Main:  Full autoconfiguration, we activate SDT rewriting. if you want to disable it see the README.
Info:  Main:  ========== End of configuration, MuMuDVB version 1.7.2_release is starting ==========
Info:  Autoconf:  The autoconfiguration auto update is enabled. If you want to disable it put "autoconf_pid_update=0" in your config file.
Info:  Main:  Streaming. Freq 11096000
Info:  Tune:  Using DVB card "TurboSight TBS 6991SE DVBS/S2 frontend" tuner 0
Info:  Tune:  Tuning DVB-S to Freq: 1346000 kHz, LO frequency 9750000 kHz Pol:H Srate=29900000, LNB number: 0
Info:  Tune:  LNB voltage 18V
Info:  Tune:  DISEQC SETTING SUCCEDED
Info:  Tune:  FE_STATUS:
Info:  Tune:  FE_STATUS:
Info:  Tune:       FE_HAS_SIGNAL : found something above the noise level
Info:  Tune:       FE_HAS_CARRIER : found a DVB signal
Info:  Tune:       FE_HAS_VITERBI : FEC is stable
Info:  Tune:       FE_HAS_SYNC : found sync bytes
Info:  Tune:       FE_HAS_LOCK : everything's working...
Info:  Tune:  Event:  Frequency: 11096000 (or 8404000)
Info:  Tune:          SymbolRate: 29900000
Info:  Tune:          FEC_inner:  2050
Info:  Tune:  Bit error rate: 67108863
Info:  Tune:  Signal strength: 30150
Info:  Tune:  SNR: 65535
Info:  Tune:  FE_STATUS:
Info:  Tune:       FE_HAS_SIGNAL : found something above the noise level
Info:  Tune:       FE_HAS_CARRIER : found a DVB signal
Info:  Tune:       FE_HAS_VITERBI : FEC is stable
Info:  Tune:       FE_HAS_SYNC : found sync bytes
Info:  Tune:       FE_HAS_LOCK : everything's working...
Info:  Main:  Card 0, tuner 0 tuned
Info:  Autoconf:  Autoconfiguration Start
Info:  CAM:  CAM Application type: 01
Info:  CAM:  CAM Application manufacturer: 4a60
Info:  CAM:  CAM Manufacturer code: 0001
Info:  CAM:  CAM Menu string: MODULE RETAIL
WARN:  Autoconf:  Warning : No NIT found before timeout
Info:  Autoconf:  Autoconfiguration done
Info:  Autoconf:  Diffusion 2 channels
Info:  Autoconf:  Channel number :   0, name : "beIN SPORTS 1 HD"  service id 410
Info:  Autoconf:        Multicast4 ip : 239.100.0.0:1234
Info:  Autoconf:  Channel number :   1, name : "beIN SPORTS 2 HD"  service id 411
Info:  Autoconf:        Multicast4 ip : 239.100.0.1:1234
Info:  Main:  Channel "beIN SPORTS 1 HD" is now highly scrambled (100% of scrambled packets). Card 0
Info:  Main:  Channel "beIN SPORTS 2 HD" is now highly scrambled (100% of scrambled packets). Card 0
achilless
 
Posts: 3
Joined: Wed Jul 22, 2015 11:34 pm

Return to Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron