Hello,
my TBS6618 works fine under Windows 7 (Pro, 64bit) on the same machine.
After installing the linux drivers the syslog and lsmod indicate the modules have been loaded and the card should be ready, however, scanning for services in my local cable operator's network does not find any services (I have to use w_scan to get results as i need the card for vdr. I also put the card into a working vdr, but that vdr is not able to tune, either, despite it already has a working channel list from another DVBC card on the same signal). I doublechecked cable and card, both work fine under Windows on the same machine.
I use http://www.tbsdtv.com/download/document ... 130127.zip.
I installed as root, tar xvjf, cd folder, cp dvb-usb-tbsqbox-dvbc.fw /lib/firmware, ./v4l/tbs-x86_64.sh, make && make install, reboot.
The logs are attached as requested. Just let me know what you need and i happily provide you with more information. The Ubuntu 12.10 is a fresh install, just for the purpose of troubleshooting the issue.
If you'd ask me, i am not sure the firmware gets loaded at all (renaming dvb-usb-tbsqbox-dvbc.fw and rebooting does not change anything in the behavior of the card and no error appears in the dmesg).
On a different machine, i have the same behavior. On both machines, with a different Ubuntu (12.04), i have the same behavior.
Can you please advice what i am doing wrong? Thank you!