TBSDTV Community Forum

heh, none info about TBS5880 on forum , none info about TBS5880 on download tbsdtv.com

the lattice is a PLD, programmable logic device. think software meets hardware (ie firmware). pretty common stuff now days. the cypruss chip is a 8051 processor, pretty common as well, used in millions of keyboards around the world. the sont chip is a DVB-T2 demodulator. the NXP is a tuner.

so combing all these together you apear to have an anysee e7 t2c on your hands

http://www.anysee.com/eng/product/anyseeE7T2C.php

or maybe some clone.

do I win some sort of prize ? hehe

UDL

that a smartcard slot on the right of the bottom picture ? if so I bet we'd see a TDA8024 chip around there somewhere too eh?

I guess, it is TBS5880 card inside:) See the subforum name.

1, Now instal driver from CD in PC. One driver for DVB-T/T2 , one driver for DVB-C. Not work simultaneous (parallel) , must run exe-driver file for change mode.
2, After lock (light blue LED) all aplications still show signal 90% with signal (strong or less, DVB-T or DVB-C).
3, After unlock (light red LED) still show runnig pid 8191.

tempo Wrote:I guess, it is TBS5880 card inside:) See the subforum name.

Sooo which one is the clone or are both developed by a third party and neither by tbs or anysee ?

UDL

anysee t2c use same samsung NIM with tda18212/cxd2820r (also used in tbs6220), now supported in linux drivers so possible replace proprietary tbs tuner-demod driver with open-source anyway this diffrent devices, but look like cypress fx2 used in both Llattice PLD implement some CI controller, no more

fix driver for bad status if no signal ? show full empty pid ~40 mbps and status as LOCKED , but none signal on input

Hi EnoSat

The PID 8191 is the empty stream,You do not need to care about this.

Kind Regards

steven

EnoSat,
do you get picture and sound on free t2 muxes? Which applications and OS do you use?