Moderator Control Panel ]

Good News,Open source code for TBS Card has been released

News and information about TBS products.

TBS6903

Postby ptergrand » Sun Nov 25, 2018 9:16 pm

driver dogru olarak yuklenmis mi
Attachments
Screenshot_20181125_161014.png
ptergrand
 
Posts: 8
Joined: Thu Oct 05, 2017 4:10 am

Re: TBS6903

Postby ptergrand » Mon Nov 26, 2018 12:56 am

ptergrand wrote:driver dogru olarak yuklenmis mi



Code: Select all
star@star:~$ dmesg | grep TBS
[   17.908610] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2
[   17.909290] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   17.996209] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:72
[   18.311682] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   18.311800] dvbdev: DVB: registering new adapter (TBSECP3 DVB Adapter)
[   18.393124] TBSECP3 driver 0000:02:00.0: MAC address 00:22:ab:f0:be:73
[   18.393148] TBSECP3 driver 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6903 DVB-S/S2 )...
[   18.393269] TBSECP3 driver 0000:02:00.0: TurboSight TBS 6903 DVB-S/S2 : PCI 0000:02:00.0, IRQ 28, MMIO 0xfeac0000
star@star:~$
ptergrand
 
Posts: 8
Joined: Thu Oct 05, 2017 4:10 am

Re: Good News,Open source code for TBS Card has been release

Postby ptergrand » Mon Nov 26, 2018 11:19 pm

usr/src/media_build/v4l/tbsecp3-dvb.c: In function 'tbs6308_read_mac_ext':
/usr/src/media_build/v4l/tbsecp3-dvb.c:197:22: warning: unused variable 'dev' [-Wunused-variable]
struct tbsecp3_dev *dev = adap->dev;
ptergrand
 
Posts: 8
Joined: Thu Oct 05, 2017 4:10 am

Re: Good News,Open source code for TBS Card has been release

Postby dnairb » Fri Feb 08, 2019 8:04 am

TBS 6205 DVB-T PCIe on Xubuntu (currently 18.04, Bionic)
Module used: Si2157

I have been using this open source code since its release with a few different cards, and have not had any issues with the installation or use of the cards. I do have a question regarding the compiling and installation process, however:

Rather than compiling every module, is it possible to pass the module's name to 'make', so that only the required module is compiled? It's not a great issue if not; it is time-consuming otherwise, however, and seems to be overkill to do this.

Brian
dnairb
 
Posts: 1
Joined: Sat May 24, 2014 5:16 am

Previous

Return to News

Who is online

Users browsing this forum: No registered users and 1 guest