Moderator Control Panel ]

Good News,Open source code for TBS Card has been released

News and information about TBS products.

Re: Good News,Open source code for TBS Card has been release

Postby Newtman » Wed Jul 20, 2016 9:41 am

crazycat Wrote:So you want receive dvb-c annex b ?

I just compile your last github and tested with my TBS6221 and annex b:

scan-s2 uy-frec
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning uy-frec
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 375000000 5360000 NONE QAM256
ERROR: cannot parse'
'
----------------------------------> Using DVB-C ANNEX_B
>>> tune to: 375:M256:C:5360:
DVB-C frequency is 375000000

WARNING: >>> tuning failed!!!
>>> tune to: 375:M256:C:5360: (tuning failed)
DVB-C frequency is 375000000
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


Fail with TVheadend too.
Newtman
 
Posts: 21
Joined: Wed Jan 08, 2014 9:12 pm

Re: Good News,Open source code for TBS Card has been release

Postby ed68 » Wed Jul 20, 2016 12:27 pm

Crazycat:

dvb-c annex a and tvb-t

Edvard
ed68
 
Posts: 5
Joined: Wed Jan 30, 2013 6:10 pm

Re: Good News,Open source code for TBS Card has been release

Postby steven » Wed Jul 20, 2016 6:21 pm

Hi Newtman

Thanks for your feedback ,for 6221 driver will be updated later

Thanks

Kind Regards

steven
steven
 
Posts: 2058
Joined: Fri Aug 06, 2010 3:23 pm

Re: Good News,Open source code for TBS Card has been release

Postby crazycat » Wed Jul 20, 2016 10:26 pm

ed68 Wrote:dvb-c annex a and tvb-t


so what relation if_atsc_qam and if_atsc_vsb to dvb-t and c ?:)
ts mode set as serial ?

Code: Select All Code
static struct cxd2820r_config cxd2820r_config = {
   .i2c_address = 0x6c, /* (0xd8 >> 1) */
   .ts_mode = 0x8,
   .set_lock_led = tbs5880_led_ctrl,
};
crazycat
 
Posts: 463
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Good News,Open source code for TBS Card has been release

Postby crazycat » Wed Jul 20, 2016 10:37 pm

I need access to test PC.
I not have any dvb-c signal, no modulator for test. si2168 demod driver changes look correct, but si2157 tuner driver maybe some wrong (if_frequency for annext b ?). So maybe you can some change si2157 code at https://github.com/crazycat69/linux_med ... 157.c#L296
First try default 5000000, next some 3600000

Newtman Wrote:I just compile your last github and tested with my TBS6221 and annex b:

scan-s2 uy-frec
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning uy-frec
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 375000000 5360000 NONE QAM256
ERROR: cannot parse'
'
----------------------------------> Using DVB-C ANNEX_B
>>> tune to: 375:M256:C:5360:
DVB-C frequency is 375000000
crazycat
 
Posts: 463
Joined: Mon Jan 31, 2011 2:46 am
Location: Ukraine, Kharkov

Re: Good News,Open source code for TBS Card has been release

Postby Newtman » Thu Jul 21, 2016 1:30 am

crazycat Wrote:I need access to test PC.
I not have any dvb-c signal, no modulator for test. si2168 demod driver changes look correct, but si2157 tuner driver maybe some wrong (if_frequency for annext b ?). So maybe you can some change si2157 code at https://github.com/crazycat69/linux_med ... 157.c#L296
First try default 5000000, next some 3600000

Newtman Wrote:I just compile your last github and tested with my TBS6221 and annex b:

scan-s2 uy-frec
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning uy-frec
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 375000000 5360000 NONE QAM256
ERROR: cannot parse'
'
----------------------------------> Using DVB-C ANNEX_B
>>> tune to: 375:M256:C:5360:
DVB-C frequency is 375000000


Crazycat If you want SSH only tell me. Check your MP.
Newtman
 
Posts: 21
Joined: Wed Jan 08, 2014 9:12 pm

Re: Good News,Open source code for TBS Card has been release

Postby helmax » Thu Jul 21, 2016 6:28 am

helmax Wrote:
helmax Wrote:any help commands for upgrade old drivers to this drivers
ubuntu 14.04



please any help
how remove old drivers?
and install new drivers ubuntu 14



please any help
how remove old drivers?
and install new drivers ubuntu 14

thanks
helmax
 
Posts: 9
Joined: Thu Oct 22, 2015 6:14 am

Re: Good News,Open source code for TBS Card has been release

Postby steven » Thu Jul 21, 2016 9:42 am

helmax Wrote:
helmax Wrote:
helmax Wrote:any help commands for upgrade old drivers to this drivers
ubuntu 14.04



please any help
how remove old drivers?
and install new drivers ubuntu 14



please any help
how remove old drivers?
and install new drivers ubuntu 14

thanks

Hi

Just need to delete the media folder
like this :
************ #uname -r
************ 3.10.0-327.13.1.el7.x86_64
************ #rm -rf /lib/modules/3.10.0-327.13.1.el7.x86_64/kernel/drivers/media

Thanks

Kind Regards

steven
steven
 
Posts: 2058
Joined: Fri Aug 06, 2010 3:23 pm

Re: Good News,Open source code for TBS Card has been release

Postby ed68 » Thu Jul 21, 2016 8:26 pm

CrazyCat:
>so what relation if_atsc_qam and if_atsc_vsb to dvb-t and c ?:)
I don't know, sweat he tries to transfer to trace of the tuner these data (0) to the tuner. The tuner freezes up.
>ts mode set as serial ?
yes.
Eduard.

PS: Work with the American standard of television is entered into the tuner recently. While she wasn't everything worked.
ed68
 
Posts: 5
Joined: Wed Jan 30, 2013 6:10 pm

Re: Good News,Open source code for TBS Card has been release

Postby Newtman » Fri Jul 22, 2016 9:55 am

I want report the excellent work of Crazycat, now I'm watching DVB-C Annex B (ATSC-C in TVHeadend now) and DVB-S2 only with the open source drivers :D
Thanks!!
Newtman
 
Posts: 21
Joined: Wed Jan 08, 2014 9:12 pm

PreviousNext

Return to News

Who is online

Users browsing this forum: No registered users and 1 guest