Moderator Control Panel ]

Linux: cx231xx #0: UsbInterface::sendCommand, failed with st

It's important to keep your driver and software updated.

Linux: cx231xx #0: UsbInterface::sendCommand, failed with st

Postby imsadi » Mon Jul 31, 2017 2:08 pm

HI,

running a linux vdr with easyvdr 3.0. Compiling and installing works so far. Both tuner recognized but after an approx. an hour the systems freezes with. Maybe i should mention that in the ci slot is an alphacrypt module.
Code: Select All Code
cx231xx #0: UsbInterface::sendCommand, failed with status --19


Kernel:
Code: Select All Code
Linux 4.4.0-45-generic


lsusb:
Code: Select All Code
lsusb
Bus 002 Device 002: ID 734c:5990 TBS Technologies China
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 14f7:0500 TechniSat Digital GmbH DVB-PC TV Star HD
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


dmesg | grep tbs
Code: Select All Code
 dmesg | grep tbs
[    8.780513] tbscxci: Initializing TBS CX CI#0 slot
[    8.790851] tbscxci: Adapter 1 CI slot initialized
[    9.381146] tbscxci: Initializing TBS CX CI#1 slot
[    9.383007] tbscxci: Adapter 2 CI slot initialized
[    9.383396] tbscxci: Adapter 2 CI slot disabled
[   15.436401] tbscxci: Adapter 1 CI slot enabled
[   18.174677] tbscxci: Adapter 1 CI slot disabled
[   19.816639] tbscxci: Adapter 1 CI slot enabled

Code: Select All Code
 dmesg | grep frontend
[    5.559586] DVB: registering adapter 0 frontend 0 (Technisat SkyStar USB HD (                                            DVB-S/S2))...
[    8.775763] DVB: registering adapter 1 frontend 0 (TurboSight TBS 5990FE DVBS                                            /S2 frontend)...
[    9.380538] DVB: registering adapter 2 frontend 0 (TurboSight TBS 5990FE DVBS
imsadi
 
Posts: 2
Joined: Fri Jul 28, 2017 9:33 pm

Re: Linux: cx231xx #0: UsbInterface::sendCommand, failed wit

Postby steven » Mon Jul 31, 2017 2:32 pm

Hi

Please have a try with dvblast check whether is ok

Thanks

Kind Regards

steven
steven
 
Posts: 2036
Joined: Fri Aug 06, 2010 3:23 pm

Re: Linux: cx231xx #0: UsbInterface::sendCommand, failed wit

Postby imsadi » Mon Jul 31, 2017 2:42 pm

Hi,

i could do that, but it´s not my intention, because i want to use all these improvements of vdr :-)

Never the less, i will give it a try, if it helps you.

Best regards
imsadi
 
Posts: 2
Joined: Fri Jul 28, 2017 9:33 pm


Return to Driver & Software Update

Who is online

Users browsing this forum: No registered users and 1 guest

cron