Page 1 of 4

TBS 6903-X blind scan

PostPosted: Mon Apr 01, 2019 10:44 pm
by aspirepy
Hello friends, I tried to do the blind search with the TBS6903X card, but I could not do it with the ebspro, nor can I do it with the crazyscan, what would be the right program to do it? or should I be able to do it with the programs mentioned above ?, thanks in advance for the answer

Re: TBS 6903-X blind scan

PostPosted: Thu Apr 04, 2019 9:27 am
by steven
Hi

Please update the crazyscan to latest version and this is our windows tools
http://www.tbsiptv.com/download/common/ ... .0.2.2.zip

Kind Regards

steven

Re: TBS 6903-X blind scan

PostPosted: Thu Apr 04, 2019 12:00 pm
by smile
Please update the latest version.

Re: TBS 6903-X blind scan

PostPosted: Thu Apr 04, 2019 10:24 pm
by aspirepy
steven Wrote:Hi

Please update the crazyscan to latest version and this is our windows tools
http://www.tbsiptv.com/download/common/ ... .0.2.2.zip

Kind Regards

steven


Thanks Steven, I'm going to try it and then I'll post the result. Anyway I tried with the tbs-blindscan_v3.0.2.2 alone and it is very slow, once again thanks

Re: TBS 6903-X blind scan

PostPosted: Mon Apr 08, 2019 7:39 am
by satesco
I'm afraid that it's a bug in this version of tbs blindscan.It's especially true when we have more feeds with different power signals.Scanning is slower with 6903X.
Here's what the parameters find on a satellite with many feeds,wrong both at frequencies and symbol rates.

Re: TBS 6903-X blind scan

PostPosted: Fri Apr 12, 2019 8:47 pm
by aspirepy
Sorry friends, I was a lot work these days, so I did not comment on what was done with the blindscan tbs and the crazyscan, in relation to the blindscan tbs as I mentioned above it is very slow (I really do not know if this is for everyone) and the Crazyscan in its latest version does not work (not even start) from the moment I installed the TBS6903X card, maybe someone could enlighten us more on how to make a better blind search with this spectacular card, any suggestions friends ?. Thanks in advance

Re: TBS 6903-X blind scan

PostPosted: Sat Apr 13, 2019 4:18 am
by satesco
You probably do not have Crazyscan v.1.0.2.160 and one of the latest versions of StreamReaderEx(v.1.2.4.79) that were designed exactly for these cards,6903X & 6909X.Hats off,@CrazyCat :D
A test with this version on a satellite feeds-Eutelsat 10A at 10.0E and and on one with DTH signal-Astra 19.2E:

Re: TBS 6903-X blind scan

PostPosted: Sat Apr 13, 2019 7:34 am
by crazycat
aspirepy Wrote:Sorry friends, I was a lot work these days, so I did not comment on what was done with the blindscan tbs and the crazyscan, in relation to the blindscan tbs as I mentioned above it is very slow (I really do not know if this is for everyone) and the Crazyscan in its latest version does not work (not even start) from the moment I installed the TBS6903X card, maybe someone could enlighten us more on how to make a better blind search with this spectacular card, any suggestions friends ?. Thanks in advance


Use latest test builds CS + StreamReaderEx-BDA
http://crazycat69.narod.ru/sattelite/St ... Ex-BDA.rar
http://crazycat69.narod.ru/sattelite/St ... zyScan.rar

Fast blindscan (BLScan2) not implemented yet for STiD135-based devices (TBS 6903x, 6909x). Only classic step-by-step BLScan, slow.
Classic RFScan replaced with FFT scan, but still some buggy :)

Re: TBS 6903-X blind scan

PostPosted: Sun Apr 14, 2019 1:27 am
by aspirepy
It works !!, thanks, thanks, thanks !!, to all those who enlightened me with their great knowledge!!!!

Image
Image
Image

Re: TBS 6903-X blind scan

PostPosted: Thu Jun 20, 2019 4:29 pm
by Motogato
Hello, is possibel add support in ebspro to 6903x ?
Thaks.