Firmware V2.0.1
Posted: Mon Dec 02, 2013 6:06 pm
Hello All,
the firmware V2.0.1 has just been released, it fixes the problem of "only one of the tuners can work after MOI is powered on".
How to update:
1. from V2.0 to V2.0.1
Copy the files in the firmware V2.0.1 folder to your micro SD card, power on MOI to start the update.
2. from V1.x to V2.0.1 (also refer to http://www.tbsdtv.com/forum/viewtopic.php?f=92&t=8691)
1) Connect RS232 serial cable & install software.
Connect one end of the RS232 cable to MOI, the other end to your PC, install the software:
- for Windows users: TTERMPRO
- for Linux users: minicom
2) Update through micro SD card*
Prepare a formatted micro SD card, copy the file "MOI290-fs.bin" into it, insert it into the SD card slot on MOI, power on MOI, "Enter" uboot quickly (within about 3 seconds after MOI is powered on) and input the command lines:
setenv loadmmcfs 'fatload mmc 0:1 40000000 MOI2900_fs.bin'
setenv updatekfs 'nand erase 50c0000;nand write.yaffs 40000000 50c0000 ${filesize}'
save
then input "re", MOI will start to update.
Download firmware V2.0.1
the firmware V2.0.1 has just been released, it fixes the problem of "only one of the tuners can work after MOI is powered on".
How to update:
1. from V2.0 to V2.0.1
Copy the files in the firmware V2.0.1 folder to your micro SD card, power on MOI to start the update.
2. from V1.x to V2.0.1 (also refer to http://www.tbsdtv.com/forum/viewtopic.php?f=92&t=8691)
1) Connect RS232 serial cable & install software.
Connect one end of the RS232 cable to MOI, the other end to your PC, install the software:
- for Windows users: TTERMPRO
- for Linux users: minicom
2) Update through micro SD card*
Prepare a formatted micro SD card, copy the file "MOI290-fs.bin" into it, insert it into the SD card slot on MOI, power on MOI, "Enter" uboot quickly (within about 3 seconds after MOI is powered on) and input the command lines:
setenv loadmmcfs 'fatload mmc 0:1 40000000 MOI2900_fs.bin'
setenv updatekfs 'nand erase 50c0000;nand write.yaffs 40000000 50c0000 ${filesize}'
save
then input "re", MOI will start to update.
Download firmware V2.0.1